User Manual
Table Of Contents
- Usage and safety precautions
- Introduction
- Terms used in this manual
- Part names
- Turning the power on
- Display information
- Adjusting effects
- Using the output booster
- Adjusting the master level
- Using patches
- Changing USB audio settings
- Changing various settings
- Using the tuner
- Using rhythms
- Using the looper
- Using the pedal
- Setting the tempo
- Setting how the TAP LED blinks
- Using as an audio interface
- Adjusting the pedal
- Restoring default settings and patches
- Updating the firmware
- Troubleshooting
- Rhythm List
- Specifications
28
• On the SYSTEM screen, turn to select AUTO SAVE.
• Press .
• Turn to set AUTO SAVE to ON/OFF.
NOTE
When set to OFF, no patch or effect parameters will be saved automatically.
• Press to confirm the auto save setting.
Note about switching patches
When AUTO SAVE is set to OFF, if you try to switch patches after changing any parameters, a
message will appear asking to save the parameter changes.
To save changes to parameters before switching patches, select YES. (P21)
To discard changes to parameters before switching patches, select NO.
Changing various settings