User Manual
Table Of Contents
- Usage and safety precautions
- Introduction
- Terms used in this manual
- Part names
- Turning the power on
- Display information
- Adjusting effects
- Using the output booster
- Adjusting the master level
- Using patches
- Changing USB audio settings
- Changing various settings
- Using the tuner
- Using rhythms
- Using the looper
- Using the pedal
- Setting the tempo
- Setting how the TAP LED blinks
- Using as an audio interface
- Adjusting the pedal
- Restoring default settings and patches
- Updating the firmware
- Troubleshooting
- Rhythm List
- Specifications
38
Using flat tuning
• On the TUNER MENU screen, turn to select FLAT.
• Press .
• Turn to change the flat tuning.
NOTE
• You can drop the tuning by one ( x 1), two ( x 2) or three ( x 3) semitones.
• Drop tuning is not possible when the TYPE is set to CHROMATIC.
• Press to confirm the flat tuning setting.
Using the tuner