User Manual
Table Of Contents
- Usage and safety precautions
- Introduction
- Terms used in this manual
- Part names
- Turning the power on
- Display information
- Adjusting effects
- Using the output booster
- Adjusting the master level
- Using patches
- Changing USB audio settings
- Changing various settings
- Using the tuner
- Using rhythms
- Using the looper
- Using the pedal
- Setting the tempo
- Setting how the TAP LED blinks
- Using as an audio interface
- Adjusting the pedal
- Restoring default settings and patches
- Updating the firmware
- Troubleshooting
- Rhythm List
- Specifications
44
Setting the looper
Setting the looper recording time
• Turn for the unit using the looper.
NOTE
• The setting options include MANUAL and 1–64 quarter notes.
• The recording time for the mono looper is from 1.5 to 80 seconds (40 seconds when UNDO is ON).
• The recording time for the stereo looper is from 1.5 to 40 seconds (20 seconds when UNDO is ON).
• Settings that will not fit in the recording time will be adjusted automatically.
• Changing the recording time will delete the recorded data.
Setting the UNDO function
• Turn for the unit using the looper to set it to ON/OFF.
NOTE
When UNDO is ON, the recording time will become as follows.
• Mono looper: 40 seconds
• Stereo looper: 20 seconds
Using the UNDO and REDO functions
If UNDO is ON, you can undo the last overdub. You can also use the REDO function to restore the
phrase that the UNDO function deleted.
With 1-unit looper
To undo an overdub, press
for one second during playback. To restore the deleted phrase, press
for one second again.
With 2-unit looper
To undo a n overdub , pr ess
for the first unit twice during playback. To restore the deleted phrase,
press
twice again.
Using the looper