User Manual
Table Of Contents
- Usage and safety precautions
- Introduction
- Terms used in this manual
- Part names
- Turning the power on
- Display information
- Adjusting effects
- Using the output booster
- Adjusting the master level
- Using patches
- Changing USB audio settings
- Changing various settings
- Using the tuner
- Using rhythms
- Using the looper
- Using the pedal
- Setting the tempo
- Setting how the TAP LED blinks
- Using as an audio interface
- Adjusting the pedal
- Restoring default settings and patches
- Updating the firmware
- Troubleshooting
- Rhythm List
- Specifications
46
Using the pedal
Selecting the pedal effect
• Press to change to STOMP mode.
• Press to select the pedal effect.
NOTE
To select the pedal category, press while pressing and holding , or press
while pressing and holding
.
Turning the pedal effect ON/OFF
• Press down.
HINT
Press the front-end of the expression pedal down to turn the pedal effect ON/OFF. This does not, however,
change the ON/OFF setting.
NOTE
You can also press to turn the pedal effect ON/OFF. This does change the ON/OFF setting.