User Manual
Table Of Contents
- Usage and safety precautions
- Introduction
- Terms used in this manual
- Part names
- Turning the power on
- Display information
- Adjusting effects
- Using the output booster
- Adjusting the master level
- Using patches
- Changing USB audio settings
- Changing various settings
- Using the tuner
- Using rhythms
- Using the looper
- Using the pedal
- Setting the tempo
- Setting how the TAP LED blinks
- Using as an audio interface
- Adjusting the pedal
- Restoring default settings and patches
- Updating the firmware
- Troubleshooting
- Rhythm List
- Specifications
47
Setting the tempo
The tempo is used for the looper, rhythm, and delay. In addition, some
modulation effects can be synchronized.
To synchronize the tempo, select an effect that can be synchronized in advance
and set a synchronizable parameter, such as "Time" or "Rate" to a musical note
("
" or " ") value.
• Press at least twice at the desired tempo.
• This sets the tempo.
HINT
You can turn to further adjust the tempo while the tempo pop-up is open.