User Manual
Table Of Contents
- Usage and safety precautions
- Introduction
- Terms used in this manual
- Part names
- Turning the power on
- Display information
- Adjusting effects
- Using the output booster
- Adjusting the master level
- Using patches
- Changing USB audio settings
- Changing various settings
- Using the tuner
- Using rhythms
- Using the looper
- Using the pedal
- Setting the tempo
- Setting how the TAP LED blinks
- Using as an audio interface
- Adjusting the pedal
- Restoring default settings and patches
- Updating the firmware
- Troubleshooting
- Rhythm List
- Specifications
55
Updating the firmware
To download the latest firmware
Visit the ZOOM Website (http://www.zoom.co.jp/).
• Connect the
to a computer using a USB cable.
• While pressing both
and
, set the POWER switch to ON.
• Launch the version update application on your computer, and execute the
update.
NOTE
Do not disconnect the USB cable during the
update.
HINT
See the ZOOM website for instructions about
how to use the application.
• "Complete!" will appear on the display when updating completes.
• Set the POWER switch to OFF.
HINT
Updating the firmware version will not erase
saved patches.
Updating the firmware