Owner's manual

MOD (Modulation) module
ZOOM GFX-3
20
TYPE 3: PAHSE ( PP
PP
HH
HH
)
Produces a swooshing sound.
Parameter 1
COLOR Parameter 2 POSI
1 – 4 AF, bF
Selects sound character.
Selects connection point of MOD module. AF (after CABINET
module) or bF (before DRIVE module) can be selected.
Parameter 3
RATE Parameter 4 RESO
1 – 30 1 – 10
Adjusts modulation speed. Adjusts the feedback amount. Higher values give a stronger character.
TYPE 4: WAH ( WW
WW
AA
AA
)
Wah effect with selectable auto wah and pedal wah.
Parameter 1
CONTROL Parameter 2 POSI
Au, Ad, Pd AF, bF
Selects the wah operation method. "Au" gives upward auto wah, and
"Ad" gives downward auto wah. "Pd" gives pedal wah.
Selects connection point of MOD module.
Parameter 3
SENS/FREQ Parameter 4 RESO/MIX
1 – 10 0 – 10
Adjusts auto wah sensitivity when Au/Ad is selected for parameter 1.
When Pd is selected, this parameter adjusts the pedal wah center
frequency.
Adjusts auto wah character intensity when Au/Ad is selected for
parameter 1. When Pd is selected, this parameter adjusts the original
sound mix amount.
TYPE 5: TREM/PAN ( TT
TT
MM
MM
) (Tremolo/Pan)
This effect can be used for tremolo or auto panning.
Parameter 1
COLOR Parameter 2 DEPTH
Mn, St 0 – 10
Selects the effect type. "Mn" gives tremolo, and "St" gives auto
panning.
Adjusts modulation intensity.
Parameter 3 RATE Parameter 4 CLIP
1 – 30 0 – 10
Adjusts modulation speed.
Higher values result in stronger modulation character through clipping
of the modulation waveform.
TYPE 6: VIBE ( VV
VV
BB
BB
) (Vibrato)
This is an automatic vibrato effect.
Parameter 1
COLOR Parameter 2 DEPTH
0 – 10 0 – 10
Adjusts the sound quality of the effect sound. Adjusts effect depth.
Parameter 3
RATE Parameter 4 MIX
1 – 30 0 – 30
Adjusts effect speed. Adjusts original sound mix.
TYPE 7: PITCH ( PP
PP
TT
TT
) (Pitch Shifter)
This effect can shift the pitch up or down.
Parameter 1
DELAY Parameter 2 SHIFT
0 – 30 -12 – -1, dt, 1 – 12, 24
Adjusts the delay time of the effect sound. Sets the pitch shift amount. The "dt" setting results in a detune effect.
Parameter 3
TONE Parameter 4 MIX
0 – 10 0 – 30
Adjusts effect tone. Adjusts original sound mix.
TYPE 8: SFX ( SS
SS
FF
FF
) (Special Effects)
Uses random waveform and envelope processing to create a special kind of sound.
Parameter 1
COLOR Parameter 2 DEPTH
0 – 10 0 – 10
Selects the way the sound is modulated. With the "0" setting, the sound
is modified using a random, stair-shaped waveform. With the "10"
setting, the level changes of the original sound are reflected in the effect
sound. Intermediate values result in intermediate effect action.
Adjusts the effect depth (sensitivity). When parameter 1 has been set to
a fairly high value, increasing this parameter results in varied delay time
according to signal intensity.
En-GFX3.book 20 ページ ２００４年１１月８日 月曜日 午後４時３０分