Specifications

Quick Guide (Trying Out the Unit)
9
ZOOM GFX-8
• For information on using the amp
simulator, see p. 7.
• For information on using the built-in tuner,
see p. 12.
• For information on record/playback of
phrases (sampler), see p. 34.
• For information on special playback of
recorded phrases (jam play), see p. 32.
Adjusts the ultra-high
frequency range.
Adjusts the high
frequency range.
Adjusts the medium
frequency range.
Adjusts the low
frequency range.
Turn the selector to choose the desired effect in the respective
module (DRIVE, MOD, DLY/REV).
Switches the respective module (DRIVE, MOD, DLY/REV)
ON and OFF and switches the group for selectable effects.
* During adjustment, the key for that module flashes.
* The parameter that can be adjusted differs for each patch.
The steps listed below will result in a change of the patch sound quality and effect intensity.
To adjust the patch sound quality,
operate PARM knobs 1 - 4.
To change the effect, use the DRIVE,
MOD, DLY/REV selectors and keys.
To change the effect intensity, operate the
GAIN, PARM SELECT, or PARM VALUE knob.
To store an edited patch, press the STORE
key twice.
• For more information on easy edit, see p. 11.
• For more information on full edit, see p. 14.
Adjusts a major parameter
of the DRIVE module.
Adjusts a major parameter
of the DLY/REV module.
Adjusts a major parameter
of the MOD module.
If required, change the store target with the BANK
UP/DOWN foot switches and foot switches 1 - 4
before pressing the STORE key twice. Note that only
patches in a user group can be selected as store
targets.
If you press the CANCEL key before pressing the
STORE key twice, the store procedure is aborted
and the unit returns to the play mode.
To select other effects or adjust the effect intensity, use
the easy edit function.
3
Other useful functions
5
To store an adjusted
patch
4
• For more information on storing patches,
see p. 18.
Quick Guide (Trying Out the Unit)