Quick start Guide

Item Explanation

System Date/Time This sets the date/time and date display format.

(YYMMDD/MMDDYY/DDMMYY)

Time Display Set how the counter appears on the display during

recording and playback.

(During recording: Elapsed Time/Remaining Time)

(During playback: Elapsed Time/Remaining Time)

LCD The time until the display backlight turns off and the

display contrast can be set.

(Backlight: Off/On/30 sec/1 min/2 min/3 min/4

min/5 min)

(Contrast: 1–10)

Battery Select the type of batteries used in the

(Alkaline/Ni-MH/Lithium)

SD card The microSD card can be formatted and tested for

performance.

Versions The rmware versions can be checked.

Factory Reset The factory default settings can be restored.

Language This sets the language shown on the display.

USB Audio I/F

input signals can be input directly to a

computer or iOS device, and playback signals on

a computer or iOS device can be output from the

Card Reader Use a computer to check the les saved on the

microSD card and copy those les to the computer.

BTA-1

(This menu item only appears when a BTA-1 is

connected.)

Make this setting when a dedicated BTA-1 Bluetooth

adapter is used to enable control of the

from an iOS device.

(Off/On)