User Manual

145
Reference / MTR mode eect types and parameters
MTR mode eect types and parameters
CRY This eect varies the sound like a talking modulator.
(1) RANGE 1–10
Adjusts the frequency band aected.
(2) RESONANC 0–10
Sets the amount of resonance.
(3) SENSE
−10–−1,
1–10
Sets the eect sensitivity.
(4) BALANCE 0–100
Adjusts the balance of the original and eect
sounds.
PITCH This eect shifts the pitch up or down
(1) SHIFT
−12–+12,
24
Sets the pitch shift in semitones.
(2) TONE
0–10 Adjusts the tone.
(3) FINE
−25–+25 Adjusts the pitch shift in cents (1/100 semitone).
(4) BALANCE
0–100
Adjusts the balance of the original and eect
sounds.
● Delay/reverb eects
AIR
This eect reproduces the reverberant atmosphere of a
room and provides spatial depth.
(1) SIZE
1–100 Sets the size of the space.
(2) REFLEX
0–10 Sets the amount of wall reections.
(3) TONE
0–10 Adjusts the tone.
(4) MIX
0–100
Adjusts the amount of eect sound mixed with
the original sound.
DELAY This delay supports long delay times of up to 5000 ms.
ECHO
This tape echo simulation supports long delay times of up
to 5000 ms.
ANALOG
This warm analog delay simulation supports long delay
times of up to 5000 ms.
The3eectsabovehavethesameparameters.
(1) TIME
1–5000 ms, ♪
(See P.146)
Sets the delay time.
(2) FEEDBACK
0–100 Adjusts the amount of feedback.
(3) HIDAMP
0–10
Adjusts the damping of high frequencies in the
delay sound.
(4) MIX
0–100
Adjusts the amount of eect sound mixed with
the original sound.