User Manual

3
Adjust the recording level of
the input source.
4
Press to start recording.
5
Press to end recording.
File name
052
Operations / Settings/recording: 4CH mode recording
Pausing
RECORDING AGAIN
Press
Press
Ref.
☞
REC FORMAT
P.049
Mark setting
P.096
AUTO REC
P.063
REC LEVEL AUTO
P.069
FILE NAME
P.050
METRONOME
P.079
PRE REC
P.065
Mode change
P.036
HINT:
File naming
In 4CH mode the input from the
built-in and the external inputs
are saved separately as stereo
WAV les.
Those 2 les are always
managed as a pair and named
as follows according to the
input.
MIC le: 4CHxxxM.wav
INPUT 1/2 le: 4CHxxxI.wav
On screen, the 2 les are shown
together as M/I.
*Youcannotchangethelenames.
Recording format
Change before recording.
Marks
When the recording format is
WAV, you can mark a le by
pressing the REC button while
recording. You can move swiftly
to marked positions during play
-
back. When you pause recording
of a WAV le, a mark will be
added at the paused point.
NOTE:
During recording and playback, the recording format and le
name type cannot be changed.
Blinks
Blinks
Lit
Counter does not return to 0.
Continue recording from the
paused position in the same le.