User Manual

144
Reference / MTR mode eect types and parameters
RING MOD
This eect creates a metallic sound. The FREQ setting can
drastically change the tone.
(1) POSITION
Before,
After
Sets the insertion point of the EFX module.
Select before or after the PREAMP.
(2) FREQ 1–50
Sets the frequency of modulation.
(3) BALANCE 0–100
Adjusts the balance of the original and eect
sounds.
(4) LEVEL 2–100
Sets the level of the signal after the EFX module.
SLOW ATK
This eect makes the attack of each note gradual, creating
a violin-like sound.
(1) POSITION
Before,
After
Sets the insertion point of the EFX module.
Select before or after the PREAMP.
(2) TIME 1–50
Adjusts the attack time.
(3) CURVE 0–10
Sets the volume change curve of the attack.
(4) LEVEL 2–100
Sets the level of the signal after the EFX module.
CHORUS
This mixes an eect sound that varies from the original
pitch, creating a varying thick sound.
ENSEMBLE
This chorus ensemble eect features three-dimensional
movement.
The2eectsabovehavethesameparameters.
(1) DEPTH 0–100
Adjusts the modulation depth.
(2) RATE 0–50
Adjusts the speed of modulation.
(3) TONE 0–10
Adjusts the tone.
(4) MIX 0–100
Adjusts the amount of eect sound mixed with
the original sound.
FLANGER
This eect adds modulation and strong undulations to the
sound.
(1) DEPTH 0–100
Adjusts the modulation depth.
(2) RATE
0–50,
(See P.146)
Adjusts the speed of modulation.
(3) RESONANC -10–+10
Sets the amount of modulation resonance.
(4) MANUAL 0–100
Adjusts the frequency band aected.
STEP This special eect changes the tone in steps.
(1) DEPTH 0–100
Adjusts the modulation depth.
(2) RATE
0–50,
(See P.146)
Adjusts the speed of modulation.
(3) RESONANC 0–10
Sets the amount of modulation resonance.
(4) SHAPE 0–10
Sets the eect sound envelope.
VIBE This eect automatically adds vibrato.
(1) DEPTH 0–100
Adjusts the modulation depth.
(2) RATE
0–50,
(See P.146)
Adjusts the speed of modulation.
(3) TONE 0–10
Adjusts the tone.
(4) BALANCE 0–100
Adjusts the balance of the original and eect
sounds.