User Manual
145
Reference / MTR mode eect types and parameters
MTR mode eect types and parameters
CRY This eect varies the sound like a talking modulator.
(1) RANGE 1–10
Adjusts the frequency band aected.
(2) RESONANC 0–10
Sets the amount of resonance.
(3) SENSE
−10–−1,
1–10
Sets the eect sensitivity.
(4) BALANCE 0–100
Adjusts the balance of the original and eect
sounds.
PITCH This eect shifts the pitch up or down
(1) SHIFT
−12–+12,
24
Sets the pitch shift in semitones.
(2) TONE
0–10 Adjusts the tone.
(3) FINE
−25–+25 Adjusts the pitch shift in cents (1/100 semitone).
(4) BALANCE
0–100
Adjusts the balance of the original and eect
sounds.
● Delay/reverb eects
AIR
This eect reproduces the reverberant atmosphere of a
room and provides spatial depth.
(1) SIZE
1–100 Sets the size of the space.
(2) REFLEX
0–10 Sets the amount of wall reections.
(3) TONE
0–10 Adjusts the tone.
(4) MIX
0–100
Adjusts the amount of eect sound mixed with
the original sound.
DELAY
This delay supports long delay times of up to 5000 ms.
ECHO
This tape echo simulation supports long delay times of up
to 5000 ms.
ANALOG
This warm analog delay simulation supports long delay
times of up to 5000 ms.
The3eectsabovehavethesameparameters.
(1) TIME
1–5000 ms,
♪
(See P.146)
Sets the delay time.
(2) FEEDBACK
0–100 Adjusts the amount of feedback.
(3) HIDAMP
0–10
Adjusts the damping of high frequencies in the
delay sound.
(4) MIX
0–100
Adjusts the amount of eect sound mixed with
the original sound.