Operation Manual

Set date and time <DATE/TIME>

028

5-2 Set date and time <DATE/TIME>

Each file will automatically record the date/time.

To facilitate searching for files by date, be sure to set the date/time after every battery change.

Press.

Select <SYSTEM> and press.

Select <DATE/TIME> and press.

Select <OK> and press.

Set YEAR

➝

MONTH

➝

DAY

➝

TIME

(Time: Minute: Second)

Select the item on <DATE/TIME>:

You can select the

item while moving

[ ] of the [DIAL].

[Change the figure number]:

You can select the

number by

rotating

the [DIAL].

Press the [DIAL] in

* The selected item values are highlighted.

Press the [DIAL] in

* [ ] comes out on display.

When “Reset DATE/TIME” is seen

during boot-up, the date/time needs

to be set.

NOTE:

• When there is no power source

connected for more than three

minutes, the DATE/TIME setting

will return to the default value.

• You cannot use this setting during

recording and playback.