Operation Manual

Setting up: USB connection, H4n used as a SD card reader
035
When you use the H4n as a SD card reader, make the following settings.
6-6 Setting up: USB connection, H4n used as a SD card reader
USB
2
Press on the top screen.
• Before physically unplugging USB
cable (and H4n) from computer,
be sure to perform the “safely
remove hardware” function on the
computer first. Unplugging USB
cable (and H4n) without performing
this function may damage files.
• Compatible operating system
Windows XP
Mac OS X (10.2 or later)
NOTE:
1
After it’s powered ‘ON’,
connect the H4n to the computer
with the USB cable.
4
Select <STORAGE> and press.
connection completed
3
Select <USB> and press.
USB bus power
USB bus power is the method to
supply power from a computer
through the USB cable.
Connecting USB with the H4n power
off condition, H4n automatically
boots up and displays USB menu.
Usage of a SD card reader
• You can use files recorded on the
H4n on your computer.
• The H4n can use audio files cre-
ated on your computer.
HINT:
From
power OFF
From
power ON
Connect H4n to computer
with USB cable.
Using USB bus power,
H4n start booting-up
Display of USB setting screen