Operation Manual

Option: Remote control operation
045
When you use the optional remote controller, you can operate the H4n from a distance.
9 Option: Remote control operation
[STOP] button
Stop recording and return to 0
Record, Recording Standby,
Temporary stop
Stop playback and the counter stops
Playback temporary stop
Stop recording and the counter stops
Recording
Stop playback and the counter stops
Playback
Stop each movement
Recording temporary stop
Playback temporary stop
[FF], [REW] buttons
Stop
Playback
Playback temporary stop
[FF] : Moves forward through file in one second increments
[REW]: Returns to the begining of the file
Press for less than one second
Scans through file in forward or reverse
direction.
Press for more than one second
Scans through file in forward or reverse direction.
The longer the button is pressed, the faster
the scanning speed. Fast Forward or Rewind
will stop at the beginning or end of the file.
Press for more than one second
[FF] move to next file
[REW] returns to the begining of the file
* However if there is a marker in a WAV file,
the button moves to the marking place.
Press for less than one second
Stop
Playback
Playback temporary stop
Pause playback
Playback
Start playback
Stop
Recording
While overwrite setting : Stops recording
While always new setting : Pauses recording
Start playback and the counter begins
to move
Stop
Restarts recording Recording,temporary stop
Starts playback
Playback, temporary stop
Starts recording
Recording standby
[PLAY/PAUSE] button
Remote control button operation
LOCATOR buttons
REC LEVEL [ +/− ]
1-100
+: increase reception
= amplification
−
:
decrease reception
= diminution
VOLUME
［
+/−
］
0-100
+: increase (higher)
−: decrease (lower)
INPUT buttons, [MIC] [1] [2]
AND INDICATORS
(green, yellow, red)
Select the input source
* the indicator corresponding to the
button shows input condition.
Green : The input source selected
Yellow : The level of the input is
over −6dB.
Red : The input is clipping
[REC]
button
Engages recording standby condition and
counter resets to 0.
Stop
Start recording and the counter begins to
move
Recording Standby
Place a mark (only for WAV FILE)
Recording Playback
Set to overwrite recording
Playback
Starts recording and sets the counter to 0
Record, Recording Standby
Stop recording
(You can continue playback while recording)
Stop
Engage recording standby condition
Stop recording and the counter stops
Stop
Start recording and the counter begins to
move
Recording Standby
Set always new recording
* This can be used only when the recording standby track available.
Recording and placing marks.
Start recording and the counter begins to move
Recording standby
INDICATOR (red)