Operation Manual

Recording function <REC LEVEL AUTO>
070
This function automatically sets the level for recording.
2-05 Recording function <REC LEVEL AUTO>
When <REC LEVEL AUTO> is used, the unit automatically
determines the recording levels using the signal present dur-
ing recording standby. If the volume surpasses 6dB during
recording, the input level is automatically adjusted with the
new level displayed on the screen for two seconds.
HINT:
Display when
recording standby
Display when -6dB is exceeded while recording
• You cannot use this function together with <AUTO REC>.
• You cannot use this setting during recording and playback.
NOTE:
STEREO MODE 4CH MODE
Present input level
1
Press.
2
Select <INPUT> and press.
3
Select <LEVEL AUTO>and press.
4
Select <ON>
Press the [MENU] button for
more than 2 seconds, and start
operation from the top screen.