User manual

Recording
Selecting inputs and adjusting levels
23
H5 Handy Recorder
HINT
If a combo type input capsule is connected to the L/R
inputs, you can enable and disable the stereo link with
these tracks in the same manner by pressing the
R
track
button while pressing and holding
L
.
NOTE
When using MULTI FILE recording mode
•
Files are created for each selected input as follows.
Track recorded File name Description
L/R input ZOOMnnnn_TrLR.WAV Stereo file
Input 1 ZOOMnnnn_Tr1.WAV Mono file
Input 2 ZOOMnnnn_Tr2.WAV Mono file
Input 1/2
(stereo setting)
ZOOMnnnn_Tr12.WAV Stereo file
Note: “nnnn” in the file name is the project number
•
All the files that are created during the same recording
in MULTI FILE mode are managed as a single project
unit.
When using STEREO FILE recording mode
•
Files are created for each selected input as follows.
ZOOMnnnn.WAV/ZOOMnnnn.MP3 (stereo file)
Note: “nnnn” in the file name is the file number
•
In STEREO FILE mode, this data is managed in file units.
3. Turn for the
selected input to adjust
the input level.
HINT
•
Adjust so that the peak level stays around −12dB.
•
If the sound distorts even when you lower the input
level, try changing mic positions and adjusting the
output levels of connected devices.
•
The COMP/LIMITER function can be used. ( P. 94)
•
Noise from wind and other sources can be cut during
recording. ( P. 93)
MULTI FILE mode