User Guide
Table Of Contents
- 1. Installing the firmware update file
- 2. Extracting the ZIP file (Windows)
- 3. Copying the firmware update file to a SD card (Windows)
- 2. Opening the downloaded file (Mac)
- 3. Copying the firmware update file to a SD card (Mac)
- 4. Insert the SD card into the H8.
- 5. Install new batteries in the H8 or connect an AC adapter.
- 6. While pressing Play/Pause key, turn the power on.
- 7. Touch “Yes” on the screen.
- 8. After the firmware update completes, turn the power off.
5
The following is the same procedure for Windows and Mac.
4. Insert the SD card into the H8.
5. Install new batteries in the H8 or connect an AC adapter.
6. While pressing , turn the power on.
①
②
NOTE
・ Always make certain that the power is off when inserting or removing a SD card. Inserting or
removing a card while the power is on could result in data loss.
・ When inserting a SD card, be sure to insert the correct end with the top side up as shown.
Left side
SD card slot