User Guide
Table Of Contents
- 1. Installing the firmware update file
- 2. Extracting the ZIP file (Windows)
- 3. Copying the firmware update file to a SD card (Windows)
- 2. Opening the downloaded file (Mac)
- 3. Copying the firmware update file to a SD card (Mac)
- 4. Insert the SD card into the H8.
- 5. Install new batteries in the H8 or connect an AC adapter.
- 6. While pressing Play/Pause key, turn the power on.
- 7. Touch “Yes” on the screen.
- 8. After the firmware update completes, turn the power off.
6
7. Touch “Yes” on the screen.
This starts the firmware update.
8. After the firmware update completes, turn the power off.
©2020 ZOOM CORPORATION Z2I-4131-01
NOTE
・ During the firmware update, do not turn the power off or remove the SD card. Doing so could
cause the H8 to become unstartable.
・ In the unlikely event that a firmware update should fail, conduct the procedures from the
beginning to update the firmware again.