Specifications

Quick Guide 2 4-track mode basic operation
ZOOM H4
25
[MENU] key functions in 4-track mode (Overwrite mode)
Press top (@) of [MENU] key
Start/stop recorder recording/playback.
Hold down right part (I) of [MENU]
key
Fast-forward from current point in
1-second increments.
Hold down left part (U) of [MENU] key
Fast-reverse from current point in 1-second
increments.
Press left part (U) of [MENU] key
Return counter to zero.
Press center of [MENU] key
Display main menu for various settings
(or return to immediately preceding screen).
Press bottom (INPUT MENU) of [MENU]
key
Display INPUT menu for making various input
related settings.
to the recording standby condition.
HINT
• In 4-track mode, the input signal can be
monitored when there is at least one track in
the recording standby condition (TRACK key lit
in red).
• While the counter is being shown on the
display, the H4 can always be set to the
recording standby condition, and recording for
a track can be carried out. However, if there is
no track in recording standby condition,
pressing the [REC] key has no effect.
• If the indication “EMPTY” is shown as the patch
name, a blank patch is selected. This will have
no effect on the sound.
6.
To return to the 4-track mode top
screen, repeatedly press the center
of the [MENU] key.
HINT
• If you have switched effects on or off or
changed effect settings, the recording level will
have to be readjusted (
→ p. 22).
• When effect processing is off, a recording level
setting of 100 will result in unity gain (no
amplification).
Recording/Playback
When preparations are complete, you are ready
to record an instrument on the first track.
1.
Out of the TRACK [1] – [4] keys,
press the key for the track to record,
so that the key is lit in red.
The input signal can now be monitored via the
[LINE OUTPUT] jack or [PHONES] jack.
2.
Press the [REC] key so that the key is
lit up in red.
The H4 goes into the recording standby mode.
HINT
When the monitor function ( → p. 51) is enabled,
the input signal can be monitored also if no track
is set to recording standby.
3.
Press the top (@ ) of the [MENU] key.
Recording starts.
4.
To stop recording, press the [REC]
key again or press the top (@
) of the
[MENU] key.
The [REC] key goes out and recording ends.
5. Tap the left part (U ) of the [MENU]
key.
The counter returns to the zero position.
In 4-track mode, the [MENU] key has the
functions shown below.
6. To check the recorded content,
H4_E.book 25 ページ ２００６年９月１日 金曜日 午後７時５６分