Specifications

4-Track Mode
ZOOM H4
61
5.
Move the jog dial up/down to bring
the cursor to the name of the tuner
mode you want to select.
The tuner mode changes.
6.
When the tuner mode change is
complete, press the center of the
[MENU] key to close the TUNER
MODE screen.
For example, when you select “GUITAR” as
tuner mode, the display looks as follows.
In tuner modes other than chromatic tuner, the
STRING button on the display can be used. This
button shows a string number in the format
STRING: x (where x is a number from 1 to 7).
The note corresponding to that string is shown in
the center of the display.
The notes for each string in the various tuner
modes are listed in the table below.
7.
Play the indicated string as an open
string, and perform tuning.
8.
To switch to another string number,
proceed as follows.
(1) Move the jog dial up/down to bring the
cursor to the STRING button, and then
press the jog dial.
The STRING button changes to reverse
indication, and you can select a string
number.
(2) Move the jog dial up/down to select the
string number, and then press the jog dial.
9.
Tune the other strings in the same
way.
10
.
When tuning is complete, press the
center of the [MENU] key to return to
the 4-track mode top screen.
HINT
You can change the reference pitch of the tuner
(default center A = 440 Hz) in the same way as for
the chromatic tuner.
STRING button
Note corresponding
to string
GUITAR BASS OPEN A OPEN D OPEN E OPEN G DADGAD
1E G E D E D D
2B D C A BBA
3G A A F G G G
4D E E D E D D
5A B A A B G A
6E E D E D D
7B
Tuner type
String number/
Note name
H4_E.book 61 ページ ２００６年９月１日 金曜日 午後７時５６分