Specifications

Effects
ZOOM H4
70
5.
Move the jog dial up/down to bring
the cursor to the project to be used
as import source, and then press the
jog dial.
●
If “ALL PATCHES” was selected in
step 4
The confirmation message “Are you sure?”
appears on the display. Check the message
and proceed to step 6.
●
If “EACH PATCH” was selected in step
4
A display showing a patch of the selected
project appears. Proceed as follows to select
the patch to import.
(1) Bring the cursor to the patch number/
patch name and press the jog dial.
(2) Move the jog dial up/down to select the
patch to be used as import source, and
then press the jog dial.
(3) Bring the cursor to the OK button and
press the jog dial.
(4) Repeat steps (1) – (3) to select the import
target patch. Then bring the cursor to the
OK button and press the jog dial.
The confirmation message “Are you sure?”
appears.
6.
To carry out the import process,
bring the cursor to the IMPORT
button and press the jog dial. When
the import process is completed, the
indication “Complete!” appears on
the display.
If you select the CANCEL button instead of the
IMPORT button, the import process is canceled
and the display from one step previously appears
again.
7.
To return to the 4-track mode top
screen, repeatedly press the center
of the [MENU] key.
Project nameProject number
IMPORT button CANCEL button
H4_E.book 70 ページ ２００６年９月１日 金曜日 午後７時５６分