4-425-717-13(1) Solid-State Memory Camcorder PMW-200 PMW-100 Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference.
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. WARNING When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible socket-outlet near the unit.
For the customers in Europe This product with the CE marking complies with the EMC Directive issued by the Commission of the European Community.
No caso de vazamento da pilha, evite o contato com a mesma. Lave qualquer parte do corpo afetado com água abundante. Ocorrendo irritação, procure auxílio médico. Não remova o invólucro da pilha. Mantenha fora do alcance das crianças. Em caso de ingestão procure auxílio médico imediatamente.
Table of Contents Overview Features .................................................................................... 10 Part Identification ................................................................... 12 Camcorder .................................................................... 12 IR Remote Commander (Supplied) .............................. 18 On-Screen Indications ............................................................ 19 Direct Menu Operation ..........................................
Using a Wi-Fi Adapter (PMW-200 only) ............................. 32 Fixing the CBK-WA01 ................................................ 32 Making a Wi-Fi Connection ......................................... 33 Using the Web Menu ................................................... 34 Recording Basic Operation Procedure .................................................... 36 Changing Basic Settings ......................................................... 38 Video Formats .................................
Playback Thumbnail Screens ................................................................. 63 Configuration of the Thumbnail Screen ....................... 63 Changing the Type of Thumbnail Screen .................... 64 Playing Clips ............................................................................ 65 Playing the Selected and Subsequent Clips in Sequence ................................................................ 65 Monitoring Audio ........................................................
CAMERA SET Menu .................................................. 80 AUDIO SET Menu ...................................................... 86 VIDEO SET Menu ....................................................... 88 LCD/VF SET Menu ..................................................... 89 TC/UB SET Menu ........................................................ 92 OTHERS Menu ............................................................
Internal Microphone ................................................... 134 Media Slot Block ........................................................ 134 Package Configuration ............................................... 134 Optional Accessories .................................................. 134 Index .......................................................................................
Overview Overview Features The PMW-200/100 is a highly compact and highperformance XDCAM1) camcorder that uses SxS1) memory cards as recording media. The imaging device used in the PMW-200 camcorder is a 1/2-inch triple-chip type “Exmor”1) CMOS sensor, and the PMW-100 camcorder uses a 1/2.9-inch single-chip type “Exmor”1) CMOS sensor. Both have an effective pixel count of 1920 × 1080. Either the UDF or FAT file system can be used with recording media. Multiple-format support Both Interlace at 1080/59.
Frame Recording function Frame Recording is a unique feature of the PMW200/100 camcorder that is especially useful for clay-animation shooting. With this function, images for pre-determined frame are recorded each time the record button is pressed. 1) Sony, XDCAM, SxS, i.LINK, Exmor, and Remote Commander are trademarks of Sony Corporation. 2) HDMI, HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries.
Overview Part Identification For functions and usage, see the pages in parentheses.
1. Lens hood Attach Insert the hood by aligning it with the mark on the camcorder and hood, and turn the hood clockwise while facing the front of the camcorder (in the opposite direction of the arrow at 2 in the illustration below), then tighten the hood fixing screw 1. Detach 1 Loosen the hood fixing screw, 2 turn the hood in the direction of the arrow, 3 then withdraw it. (page 23) 7. DC IN connector (page 22) 8. Battery pack receptacle (page 21) 9. EXPOSURE dial/button (PMW-100) Overview PMW-200 4.
2 3 12 4 5 6 78 Overview 1 PMW-200 13 12 Controls on the grip (page 17) 1. Viewfinder (page 23) How to attach the EVF large eyecup PMW-200 Stretch the EVF large eyecup for attaching to the viewfinder and insert it aligning with the horizontal groove of the eyecup. 11 10 9 4. LCD (Liquid Crystal Display) monitor (page 23) 5. Front accessory shoe 6. Built-in microphone (page 45) 7. REC/TALLY lamp 8. Front IR remote control receptor/ NightShot IR transmitter (PMW-100 only) (page 43) 9.
. VOLUME (monitor volume) buttons (page 46) 16. CANCEL button 17. DURATION/TC/U-BIT (time data 2 selection) button (page 44) 1 13. Eyepiece focusing knob (PMW-200 only) (page 23) Overview 3 4 18. REC START/STOP button (page 37) 19. REC HOLD lever (page 37) Lens control block (PMW-200 only) Operation panel on the handle 1 2 3 4 5 6 7 8 11 12 13 14 15 16 17 18 19 9 10 1. PLAY/PAUSE button (page 65) 2. F REV (fast reverse) button (page 66) 3. THUMBNAIL button (page 63) 4.
Side operation panel Overview 1 2 3 4 5 6 7 8 It functions accordingly when you turn it up or down, or you push it horizontally. It is called the “jog dial” in the subsequent operating instructions. 15. CANCEL button Card slot block +06 #7 61 ':6 / #07 +06 #7 61 ':6 / #07 The SxS memory card slots and EJECT buttons are located behind the cover. Open the cover 1 9 10 2 11 12 13 14 15 1. FOCUS (focus adjustment mode) switch (PMW-100 only) (page 42) 3 2.
Rear connector panel Controls on the grip Behind the cover 1 4 2 3 5 6 7 8 Overview 1 2 3 PMW-200 9 4 5 1. USB connector (Mini B) 2. i.LINK (HDV/DV) connector (4-pin, S400 PMW-200 conforming to IEEE1394) (page 103) 3. A/V OUT connector (audio/video multi output) (page 104) 4. HDMI OUT connector (page 103) 5. SDI OUT connector (BNC type) (page 103) 6. TC IN (timecode input)/TC OUT (timecode output) connector (BNC type) (page 109) 1. REC REVIEW button (page 37) 2. Power zoom lever (page 42) 3.
3. Backup battery holder (page 120) Overview IR Remote Commander (Supplied) The buttons without remarks can be used in the same manner as the corresponding buttons on the camcorder. 1 2 3 4 5 6 PUSH SET 1 T SHOTMARK ZOOM 2 W THUMBNAIL SUB CLIP PREV PLAY/PAUSE . u NEXT STOP > x FREV FFWD m M REC z REC PAUSE PUSH AF X 7 8 9 10 11 12 13 1. ZOOM T/W (telephoto/wide-angle) buttons 2. SHOTMARK 1 and 2 buttons (page 46, page 66) 3. THUMBNAIL button 4.
While recording (or standing by to record), pressing the DISPLAY button displays the statuses and settings of this unit on the LCD monitor/viewfinder screen. Overview On-Screen Indications Remarks [M]: The indication of the items named with this suffix can be independently turned on/off with “Display On/Off” in the LCD/VF SET menu (page 90).
8. Wide-conversion lens setting indicator [M] Overview (page 85) Displayed when Wide Conversion of the CAMERA SET menu is set to “On”. 9. Synchronous recording display [M] Displayed when “SDI Rec Control” in the VIDEO SET menu is set to “HD SDI Remote I/F.” 10. NightShot mode indication (PMW-100 only) [M][A] (page 43) 11. ND FILTER position (PMW-200 only) [M] Displays the selected ND filter number (page 38).
Preparations Power Supply Lithium-ion Battery Pack BP-U30 BP-U60 BP-U90 Battery Charger/AC Adaptor BC-U1 BC-U2 WARNING Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Note The AC adaptor cannot be connected to the camcorder while the battery pack is inserted. Using a Battery Pack Fully insert the battery pack into the battery pack receptacle (page 13), then slide it to the left to lock it.
Using AC Power (DC IN Power) Setting the Clock Connection example: when connecting BC-U1 Preparations When you turn the camcorder on for the first time after purchasing or replacing the backup battery (page 120), the Initial Setting display appears on the LCD monitor/viewfinder screen. Set the date and time of the built-in clock, using this display. 1 2 Time Zone The value shows the time difference from UTC (Coordinated Universal Time). Change the setting if needed.
Adjusting the LCD Monitor and Viewfinder The LCD monitor turns on when it is opened and turns off when it is returned to the park position. Adjusting the angle It can be rotated as much as 90 degrees in the direction facing the subject and as much as 180 degrees in the opposite direction. When you rotate it 90 degrees toward the subject, the image on the monitor becomes upside down, indicating the mirror image of the subject.
Using the IR Remote Commander Before use Replacing the battery in the IR Remote Commander Use a commercially available CR2025 lithium battery. Do not use any battery other than a CR2025. Preparations 1 Before you use the supplied IR Remote Commander for the first time, pull out the insulation sheet from the battery holder. Hold down the lock lever 1, pull out the battery holder 2, and remove the battery. Insulation sheet 1 A CR2025 lithium battery is set in the holder at the factory.
Using SxS Memory Cards Inserting/Removing an SxS Memory Card Inserting an SxS memory card 1 Open the cover of the card slot block (page 16). About SxS Memory Cards 2 Insert the SxS memory card into the slot with the SxS label facing right. The ACCESS lamp (page 16) lights in red then changes to green once the memory card is ready for use. Usable SxS memory cards Use the following Sony-made SxS memory cards. Operations are not guaranteed with memory cards other than the following cards.
Preparations Switching Between SxS Memory Cards Checking the Remaining Time Available for Recording When SxS memory cards are loaded in both card slots A and B, press the SLOT SELECT button (page 16) to select the card you wish to use. If a card becomes full during recording, switching to the other card is automatically executed. While recording (or standing by to record), you can check the time remaining for the SxS memory cards loaded in the card slots on the LCD monitor/EVF screen (page 19).
During restoration, the in-progress message and status bar (%) are displayed, and the ACCESS lamp is lit in red. When restoration is completed, the completion message is displayed for three seconds. 1 Copy necessary clips to another SxS memory card, using the copy function (page 69) of the camcorder or the dedicated application software (supplied) (page 105). 2 Format the problem SxS memory card, using the format function of this camcorder.
2 Fit the bottom plate (spring type) into the auxiliary shoe. Slits for screw holes Bottom plate For a PHU-220R that is not formatted or that was formatted with another system, the message “Unsupported File System” is displayed on the LCD monitor/EVF screen. Preparations To execute formatting Insert the bottom plate from the end where the two slits for the screw holes of the auxiliary shoe are not open.
To restore the hard disk Select “Execute” via the up/down/left/right buttons or the jog dial, then press the SEL/ SET button or the jog dial. If restoration fails • A PHU-220R on which an error occurred may become usable again through reformatting. • In some cases, only parts of clips cannot be restored. Playback of the restored clips becomes possible again.
Note When formatting, all data in an XQD memory card— including protected images—are erased and cannot be restored. Preparations Connection between the camcorder and a PC To use an XQD memory card in which data have been recorded with an XDCAM/XDCAM EXseries product, insert it into the slot of the camcorder and connect between the PC and this camcorder using a USB cable.
Notes • Use USB flash drives with a capacity of 4 GB to 32 GB. • USB flash drives other than those listed above may not be recognized if connected to the external device connector. USB flash drives must be formatted with the FAT32 file system. • “Memory Stick” and are trademarks of Sony Corporation. • “Memory Stick PRO-HG Duo” and are trademarks of Sony Corporation. • “XQD” is a trademark of Sony Corporation.
2 Insert the protrusion on the back of the CBK-WA01 into the hole on the Wi-Fi adapter fixing bracket, and tighten the screw to fix the CBK-WA01 to the bracket. 3 Loosen the screws, remove the cover of the external device connector, then connect the cable of the CBK-WA01. Using a Wi-Fi Adapter (PMW-200 only) Preparations Mounting an optional CBK-WA01 Wi-Fi Adapter on this camcorder allows a Wi-Fi connection between a computer and the camcorder.
Mark Screws for mounting microphone cable holder To make a connection in ad hoc mode Refer to “Settings on the Computer” under “Making a Wi-Fi Connection to Your Computer (Ad hoc Mode)” in the Operating Instructions supplied with the CBK-WA01 to make settings on the computer. 2 Start a connection on the computer. 3 Set OTHERS >Wi-Fi >Wi-Fi to [Enable] in the setup menu. 4 Set OTHERS >Wi-Fi >Scan Networks to [Execute] and press the SEL/SET button.
8 SSID (network name): Selected network connection name Network Type (connection mode): Infra Ch (channel): Auto Authentication (network authentication): Depending the settings on the computer, Open, Shared, WPA or WPA2 Encryption (data encryption): Depending the settings on the computer, Disable, WEP, TKIP or AES WEP Key Index (key index): 1 when Encryption is set to [WEP] Input Select (key input format): Depending the network key (or security key), ASCII5, ASCII13, HEX10 or HEX26 when Encryption is set t
To display the Web menu 1 Preparations Launch a browser on the computer, and navigate to “http:// (setting of OTHERS >Network >IP Address in the setup menu)”. Example (when the IP address is “192.168.1.10”): Type “http:// 192.168.1.10/” in the address bar. If the connection is complete, a dialog appears asking you to enter the user name and password. 2 Enter the user name and password, and click [OK]. User name: admin Password: pmw-200 (Lower-case the model name.
Recording Basic Operation Procedure 4 Preparing the lens cap PMW-200 Recording 7, 8 REC START/STOP 9 REC REVIEW (on the grip) 5 Power switch: ON (the " position) 3 LCD monitor angle adjustment 1 Battery pack insertion 6 FULL AUTO 2 SxS memory card slots Preparations 1 2 Mount a fully charged battery pack. Load SxS memory card(s). If you load two cards, recording is continued by automatically switching to the second card when the first card becomes full.
“White Balance” on page 39 Note AF (Auto Focus) is not activated by setting the camcorder to Full Auto mode. For information of automatic focus adjustment, see “Focus” (page 42). 7 Press the REC START/STOP button. You can also start recording with the REC START button on the grip. (If you are using the IR Remote Commander, press the REC button simultaneously with the unmarked button.) 8 To stop recording, press the REC START/STOP button again.
Maximum duration of a clip The maximum clip length is 24 hours for FAT (MP4 or AVI) and 6 hours for UDF (MXF). If you exceed the maximum clip length, a new clip will be automatically created. You can check the new clip on the thumbnail screen. Changing Basic Settings You can make changes to the settings based on the intended usage of the recorded video or recording conditions.
Clear: ND filter not used White Balance You can select the adjustment mode according to the shooting conditions. Memory A mode, Memory B mode The white balance is adjusted to the value stored in memory A or memory B. Pressing the WHITE BAL button executes auto white balance and stores the adjusted value in memory A or memory B. ATW (Auto-Tracing White balance) mode In this mode, the camcorder automatically adjusts the white balance to the appropriate condition.
• When NightShot mode is set to “On,” auto white balance cannot be performed. (PMW-100 only) • If auto white balance adjustment fails, an error message is displayed on the screen for approximately 3 seconds. If the error message continues to be displayed after several attempts, consult your Sony service representative. Markers/Zebra Patterns During recording, various markers and zebra patterns can be inserted into the image on the LCD monitor/EVF screen. This does not affect recording signals.
Notes • When the Direct menu is in Part mode, you cannot turn the shutter on/off with the Direct menu if the SHUTTER switch is set to ON. If the SHUTTER switch is set to OFF, you can switch only between Auto Shutter and Shutter OFF. • The Direct menu cannot be selected when Full Auto mode is turned on (page 36) or when the SLS/EX SLS mode is set. Shooting in SLS/EX SLS Mode Shooting in Auto Shutter Mode The shutter speed is automatically adjusted according to the picture brightness.
PMW-100: Setting the FOCUS/ZOOM switch (page 13) to the ZOOM position activates ZOOM adjustment via the lens operation ring (page 13). Using the Power Zoom Recording The power zoom lever (page 17) on the grip and the handle ZOOM button (page 15) are activated. The current zoom position is displayed on the screen in the range of 0 (Wide) to 99 (Tele) when you press the DISPLAY button. The supplied IR Remote Commander and optional lens remote control unit (PMW-200 only) can also be used.
PMW-100: Set the FOCUS/ZOOM switch (page 13) to FOCUS and the FOCUS switch (page 16) to MANUAL. PMW-200: Slide the focus ring forward (to lens hood side), then set the FOCUS switch (page 15) to MANUAL. In this mode, expanded focus function, peaking function, one-push auto focus function and the MF Assist function are activated. Rotate the lens operation ring (PMW-100) or focus ring (PMW-200) while looking at the LCD monitor/EVF screen to adjust the focus.
Flickers Setting the shutter speed according to the power-supply frequency Activate the electronic shutter (page 40) and set the shutter speed according to the power supply frequency. When the frequency is 50 Hz Set the shutter speed to 1/50 or 1/100 seconds. Recording When the frequency is 60 Hz Set the shutter speed to 1/60 or 1/120 seconds.
3 Recording Audio Signals Connect the microphone cable to the AUDIO IN CH-1/CH-2 connectors. Four channels (CH-1/CH-2/CH-3/CH-4) of audio can be recorded (Linear PCM recording) in synchronization with video recording. You can use the built-in stereo microphones (omni-directional electret condenser microphones) or 2-channel external audio inputs to the AUDIO IN connectors by switching with the AUDIO IN switches.
To adjust the levels manually Set the AUDIO SELECT switches CH-1 and CH2 to MANUAL and adjust the audio recording levels by turning the AUDIO LEVEL knobs (page 16). Set the controls to 5 for the reference setting (0 dB). Setting to 10 maximizes the level (+12 dB), and setting to 0 minimizes it (–∞). The input levels are displayed on the screen when you press the DISPLAY button (page 19).
an assignable button (page 48), you can also use that button. For operations to add shot marks after recording, see “Adding Shot Marks During Playback (UDF and FAT HD Mode)” on page 66 and “Adding/Deleting Shot Marks (UDF and FAT HD Mode)” on page 72. For operation to apply a name to a shot mark, see “Defining Shot Mark names in Planning Metadata” on page 62. Adding the OK mark When recording of a clip ends, press the assignable button to which you assigned the OK Mark function.
• The Setup and PICTURE PROFILE menus cannot be operated during Rec Review. Assignable Buttons The camcorder has assignable buttons (five for PMW-200, four for PMW-100) (page 16) to which you can assign various functions for convenience. Recording To change functions Use “Assign Button” (page 95) in the OTHERS menu. The assigned functions can be viewed on the Button/Remote status screen (page 75). • Interval Recording mode cannot be used when the items “DVCAM” or “HDV” are set for “SDI/HDMI/ i.
• Frame Recording mode cannot be used when the items “DVCAM” or “HDV” are set for “SDI/HDMI/i.LINK I/O Select” (page 88) in the VIDEO SET menu, and the video format of “Format” in “System” (page 97) in the OTHERS menu is set to other than “HQ mode/ 23.98P.” Performing Frame Recording Preparatory settings When the preparatory settings are completed, you can start recording. Before starting Clip Continuous Recording, make the necessary settings to “Clip Cont.
Restricted Operations If you perform any of the following operations while recording or standing by to record, 1 continuous clip will not be created. The next time you start recording, a new clip will be created. • Performing clip operations (locking, deleting, or changing the names of clips). • Switching the memory card slot. • Changing the recording format. • Setting the power switch to OFF. • Displaying the thumbnail screen. • Playing clips.
Notes Freeze Mix: Image Alignment In UDF HD Mode or FAT HD Mode, an image (still picture) of a recorded clip can be temporarily superimposed on the current camera picture, permitting you to easily align images for your next recording. To use the Freeze Mix function While standing by to record, assign the Freeze Mix function to one of the assignable buttons (page 48).
Picture Profiles You can customize the picture quality, depending on the conditions or circumstances of recording, and store settings as a picture profile, enabling you to recall the profile as necessary. Six different picture profiles (PP1 to PP6) can be stored in memory. The same standard (reference) values are registered to six picture profiles at the factory as those specified for the Picture Profile Off status. Note Recording The picture profiles can be operated only while standing by to record.
Picture Profile Items The values when “Off” is selected at “SEL” of the PICTURE PROFILE menu are shown in bold face (example: Standard). PICTURE PROFILE SET Items Subitems and setting values Contents Profile Name Set the profile name in 8 characters at maximum. You can use upper- and lowercase alphabetics, numerics 0 to 9, - (hyphen), _ (underscore) and space. Matrix Set to “On” to activate the color phase adjustment function with matrix operations for the entire picture.
PICTURE PROFILE SET Items Subitems and setting values Contents Color Correction (PMW-200 only) Setting On / Off Adjusting the color phase in a specific area (Unselectable when “Multi Matrix” is Area Detection2) selected in the Multi Matrix Execute/Cancel mode) Area Indication1) On / Off Set to “On” to enable the color phase adjustment for a specific area. (Simultaneous adjustment of multiple areas is not allowed. You can adjust it for one area only.
PICTURE PROFILE SET Items Subitems and setting values Contents HD Detail Setting On / Off Adjusting the details to be applied to the picture in HD Level Mode –99 to +99 (±0) Set to “On” to apply the details to the video signal. Adjust the detail level. Set the center frequency of the details. Setting the center frequency higher decreases the details, and setting it lower increases the details. Crispening –99 to +99 (±0) Adjust the noise-suppression level.
PICTURE PROFILE SET Items Subitems and setting values Contents SD Detail Setting On / Off Set to “On” to apply the details to the video signal. Level –99 to +99 (±0) Adjust the detail level. Frequency –99 to +99 (±0) Set the center frequency of the details. Setting the center frequency higher decreases the details, and setting it lower increases the details. Crispening –99 to +99 (±0) Adjust the noise-suppression level.
PICTURE PROFILE SET Items Subitems and setting values Contents Width 0 to 90 (40) Adjust the width of the color phase of the target area for Skin Tone Detail control. Note When Area Detection is executed, the Width setting automatically returns to 40.
PICTURE PROFILE SET Items Subitems and setting values Contents Black –99 to +99 (±0) Adjust the master black level. –99 to +99 (HD: ±0, SD: -16) Adjust the level of black gamma function that emphasizes only the dark areas of the picture to clear the tones or on the contrary de-emphasizes it to reduce noise. –99 to +99 (±0) Adjust the level of the low key saturation to heighten the colors only in the dark areas of the picture or pale them to reduce noise. Execute / Cancel Select “Execute” to copy.
Deleting Clips While standing by to record, the Last Clip DEL function for deleting the last recorded clip and the All Clips DEL function for deleting all clips from an SxS memory card are available. For clip deletion on the thumbnail screen, see “Deleting Clips” on page 70.
2 Select “Recall” in “Camera Data” (page 94) in the OTHERS menu, then select “EXECUTE.” An in-progress message is displayed during data reading. When the read-out is completed, a completion message is displayed, indicating that the camcorder settings have been changed according to the setup file. Recording To use a USB flash drive (PMW-200 only, in UDF mode) Connect the formatted USB flash drive to the external device connector (page 31). Select All Save(USB) >Execute in step 2.
date of file creation, and the titles specified in the file. Select “Properties” in “Plan.Metadata” (page 99) in the OTHERS menu, then select “Execute.” Using the Wi-Fi connection When connecting the unit with a computer via Wi-Fi, the file transmission can be done accessing the unit’s Web menu from a computer. 1 Launch the browser and input http:// (page 100) in the address bar. 2 Input the user name and password, then click OK.
Defining Shot Mark names in Planning Metadata Copying Planning Metadata files collectively When you record shot mark 1 or shot mark 2, you can apply a name to the shot mark, using a string defined in planning metadata. You can copy planning metadata files stored in the General folder on an SxS memory card collectively to another SxS memory card. Select “General Files” in “Copy All” (page 99) in the OTHERS menu.
Playback Thumbnail Screens When you press the THUMBNAIL button (page 15), clips recorded on the SxS memory card are displayed as thumbnails on the screen. If no clips are recorded on the card, a no-clip message is displayed. You can start playback from the clip selected on the thumbnail screen. The playback picture can be seen on the LCD monitor/EVF and external monitors. Press the STOP/CAM button (page 15) to exit the thumbnail screen and return to the recording screen.
4. Lock mark (UDF and FAT HD Mode only) UDF: A lock mark appears if the selected clip is locked. FAT HD Mode: A lock mark appears if the selected clip has an OK mark. 5. AV independent file icon (UDF and FAT HD Mode only) Displayed only if the selected clip is an AV independent file. This indicates that not all operations and indications may be available, because the clip may have been added manually to the SxS file via a computer, etc., and there is no management file for it. 6. Recording video format 7.
Playing Clips For playback operations, use the playback control buttons on the handle (page 15). When the IR Remote Commander is enabled, you can use its playback control buttons instead (page 24). Information displayed on the playback screen The following information is superimposed on the playback picture. 1 120min 2 B PLAY 3 4 5 TCR 00:00:00:00 0011/03 00 Playing the Selected and Subsequent Clips in Sequence 1 CH1 CH2 7 Press the PLAY/PAUSE button.
Monitoring Audio In Normal playback mode, you can monitor the recorded audio signals through the built-in speaker (page 14) or connected headphones. With the headphones connected to the headphone connector (page 13), the built-in speaker is turned off. Press the VOLUME buttons (page 15) to adjust the sound volume. You can select audio channel(s) to be monitored with “Audio Output” (page 87) in the AUDIO SET menu. Clip Operations During thumbnail screen playback, etc.
Expand Clip screen (page 71) CANCEL EXPAND (COARSE) Clip Operation menu on the thumbnail screen PAUSE Pressing the SEL/SET button or the jog dial with the thumbnail screen (page 63) displayed calls the Clip Operation menu for the clip at the cursor.
Displaying the Detailed Information of a Clip Select “DISP CLIP INFO” from a Clip Operation menu. 4 120min CL I P I NFO JPAN0011( 1 ) OK 01 / JAN / 2009 10 : 53 HQ 1920 / 23.9 P MP4 S&Q Mot i on 29 / 24fp s TCR 00 : 05 : 00 : 02 TCR 00 : 05 : 00 : 00 STR TCR 00 : 08 : 19 : 23 END DUR 00 : 03 : 20 : 00 CH1/2 /3 /4 /5 /6 /7 /8 1 2 PREV CLI P NEXT CL I P 5 6 7 8 9 10 11 12 13 14 15 Playback 3 1. Image of the current clip 2.
Adding/Deleting a Flag (UDF Only) Copying Clips You can add an OK/NG/KP flag to clips recorded in UDF. By adding flags, you can set the camcorder to display only clips with certain flag settings on the thumbnail screen (OK/NG/KP/ None-Clip thumbnail screen) (page 64). When adding a flag, you can select from OK FLAG ADD, NG FLAG ADD, and KEEP FLAG ADD in the Clip Operation menu (page 67) on the thumbnail screen. When deleting a flag, select CLIP FLAG DELETE.
Deleting Clips EXPAND CLIP screen in UDF and FAT HD Mode You can delete clips from the SxS memory card. Select “DELETE CLIP” from the Clip Operation menu. Current frame number 120min EXPAND CLIP 0000123 Note Clips with an OK mark and flagged clips set to LOCK CLIP cannot be deleted. To delete them, release the OK mark or the LOCK CLIP setting before performing the delete operation.
EXPAND CLIP screen in FAT SD Mode Current frame number 120min EXPAND CLIP 00 : 00 : 00 : 00 00 : 09 : 30 : 00 0000001 00 : 19 : 00 : 00 Clip Operation menu on the EXPAND CLIP screen UDF and FAT HD Mode When you select a frame on the EXPAND CLIP screen and press the SEL/SET button or the jog dial, the Clip Operation menu pops up to enable operations such as displaying more detailed split displays and saving the frames after the selected frame as different clip.
SHOT MARK screen example (when ALL MARKS is selected) 120min SHOT MARK1 S1 01 : 10 : 20 : 00 S2 01 : 10 : 30 : 00 S1 01 : 11 : 00 : 00 S1 01 : 11 : 10 : 00 - - - 0031 / 0031 S2 - - - 01 : 10 : 40 : 00 - - - - - - 01 / JAN / 2009 10 : 53 S&Q 29 / 24 JPAN0011( 1 ) HQ 1920 / 23 .
Dividing a Clip (FAT HD Mode Only) In FAT HD Mode, you can divide a clip into two different clips at the frame you select on the EXPAND CLIP screen (page 70) or the SHOT MARK screen (page 71). Select “DIVIDE CLIP” from the Clip Operation menu. The first 4 characters of the original clip name are carried on, continuing to the last number on the memory card by the second 4 numerics.
Status Displays Showing the Status Screens Press the STATUS button (page 15) to display status screens on the LCD monitor/EVF screen/ external video monitor. Use the up/down buttons (page 15) or the jog dial (page 16) to perform operations and switch the screens in sequence. When you press the STATUS button again, the status screen display is canceled. For connections of an external monitor, see “Connecting External Monitors and Recording Devices” on page 103.
Audio Status Screen Video Status Screen Output CH: External output/headphone output Depending on the setting of “Output CH” in “Audio Output” in the AUDIO SET menu and the setting of “Monitor CH,” the audio channel(s) external output and headphones output is displayed as follows.
Battery/Media Status Screen Battery: Battery charge remaining The remaining charge level of the mounted battery pack is displayed. Charge Count: Repeated charge times The number of times that the mounted battery pack has been charged is displayed. HDD A/HDD B: Battery remaining of PHU-220R units When professional hard disk units are connected, the remaining power levels of the batteries of the professional hard disk units connected via the respective card slots are displayed.
Menu Configuration and Detailed Settings Overview of the Setup Menus Press the MENU button to display setup menus on the LCD monitor/EVF screen with settings necessary for recording and playback. (You can also display setup menus on an external monitor.) Set items by selecting them from the following menus. CAMERA SET menu: For setting items related to recording other than those for picture quality. (For picture quality-related items, use the PICTURE PROFILE menu (page 53).
LCD/VF SET LCD EVF Peaking Marker Zebra Display On/Off Basic Menu Operations Menu controls TC/UB SET OTHERS Menu Configuration and Detailed Settings 78 Timecode Users Bit TC Format All Reset Camera Data Time Zone Clock Set Language Assign Button Tally Hours Meter IR Remote Battery Alarm Battery INFO Genlock Direct Menu Trigger Mode System Clip Copy All Format Media Plan.
Setting the Setup menus Entering a character string Rotate the jog dial or press the up/down/left/right buttons to set the cursor to the icon of the menu you wish to set, then push the jog dial or SEL/ SET button to select that menu. • The menu item selection area can show 7 lines at maximum. When all the selectable items cannot be displayed at one time, you can scroll the display up or down by moving the cursor.
Setup Menu List The functions and available settings of menus are listed below. The default settings set at the factory are shown in bold face (example: Speed). The items marked with [M] in the Menu items column cannot be set while displaying the thumbnail screen or during playback operations. CAMERA SET Menu CAMERA SET Menu items Subitems and setting values Contents Gain Setup Low –3 / 0 / 3 / 6 / 9 /12 /18 dB Set the gain level to be used when the switch is set to the L position.
CAMERA SET Menu items Subitems and setting values Contents SLS/EX SLS Setting OFF / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 16 / 32 / 64 (PMW-100 only) Setting the Slow Shutter mode/ Supersensitized Slow Shutter mode EX Slow Shutter Setting On / Off On / Off Setting the Color Bars Turn EX Slow Shutter mode on/off. Note The setting automatically returns to “Off” when the camcorder is turned off. Set the number of frames to accumulate.
CAMERA SET Menu items Subitems and setting values Contents Flicker Reduce Mode Auto / On / Off Setting Flicker Compensation Set the operation of the Flicker-Reduction function. On: To always activate it Auto: To automatically activate it when flicker is detected. Off: To not activate it Notes • It is recommended to set this to “Off” when shooting outdoors or under lighting that does not cause flicker. (It can be also “Auto,” but the compensation may not be done properly.
CAMERA SET Menu items Subitems and setting values Contents Interval Rec Setting On / Off Setting the Interval Recording Interval Time function 1 to 10/15/20/30/40/50 sec Turn the Interval Recording function on/off. Set the interval of recording in Interval Recording. 1 to 10/15/20/30/40/50 min 1 to 4/6/12/24 hour Frame Rec Setting the Frame Recording function Number of Frames 1 / 3 / 6 / 9 or 2 / 6 / 12 (When using 720/ 59.
CAMERA SET Menu items Subitems and setting values Contents TLCS Level +1.0 / +0.5 / ±0 / –0.5 / –1.0 Set the target level (to make brighter or darker) of auto iris (PMW-200)/auto exposure (PMW-100) control in TLCS. (This setting also affects the gain control in AGC mode and shutter-speed control in Auto Shutter mode.) +1.0: Approx. one stop further open +0.5: Approx. half a stop further open ±0: Standard –0.5: Approx. half a stop further closed –1.0: Approx.
CAMERA SET Menu items ATW Speed Subitems and setting values Contents 1/2/3/4/5 Set the tracing speed of ATW. The larger the number you set, the speed becomes faster. On / Off Set to “On” when a wide-conversion lens is attached. On / Off Turn the Steady Shot (image stabilizer) function on/off.
AUDIO SET Menu AUDIO SET Menu items Subitems and setting values Contents Audio Input CH3 Input Source Internal / External Set the audio signal source to be recorded for CH3 for a 4channel recordable format. Internal: Record the L side of the internal microphone for CH3. External: Record the AUDIO IN CH1 signal for CH3. CH4 Input Source Internal / External Set the audio signal source to be recorded for CH4 for a 4channel recordable format. Internal: Record the R side of the internal microphone for CH4.
AUDIO SET Menu items Audio Output Setting for audio outputs Subitems and setting values Contents Select auto tuning for the input level of an analog audio signal recorded to CH-3 or CH-4. Mono: Perform for each channel. Stereo: Perform in stereo mode. Off: Do not perform auto tuning. The Limiter Mode setting is applied. 1KHz Tone On / Off Turn the 1-kHz reference tone signal on/off. Wind Filter CH-1 On / Off Turn the wind filter for CH1 on/off.
VIDEO SET Menu VIDEO SET Menu items Setting values Contents Input Source Select Camera / i.LINK Select video and audio signal for the input source. Camera: Camera image i.LINK: HDV/DVCAM input via the i.LINK (HDV/DV) connector Setting the input source Notes • i.LINK is unavailable when using UDF. • DVCAM is for display only and cannot be recorded. SDI/HDMI/ i.
VIDEO SET Menu items Down Converter Setting values Set the output mode (aspect) for SD signals Squeeze: To horizontally reduce a 16:9 picture to output a 4:3 picture Letterbox: To mask the upper and lower areas of a 4:3 picture to display a 16:9 picture in the center of the screen Edge Crop: To cut the both sides of a 16:9 picture to output a 4:3 picture 59.94i (2-3 Pull Down)/ 23.98PsF Select the video output format when the video format for UDF HD Mode is HD422 50/1080/23.98P, HD420 HQ/1080/ 23.
LCD/VF SET Menu items Subitems and setting values Contents Marker Setting On / Off Setting the markers added to Safety Zone pictures on the On / Off LCD monitor/EVF Safety Area screen 80% / 90% / 92.5% / 95% [M] Turn all marker indications on/off in combination. Turn the safety marker on/off. Select the size (ratio to the entire screen) of the safety zone marker. Center Marker On / Off Turn the center marker on/off. Aspect Marker Line / Mask / Off Select the aspect marker.
LCD/VF SET Menu items Subitems and setting values Contents Turn the time data (timecode, user bits, duration) indication on/off. Battery Remain On / Off Turn the battery remaining/DC input voltage indication on/ off. Media Remain On / Off Turn the media remaining indication on/off. TLCS Mode On / Off Turn the TLCS mode indication on/off. Steady Shot On / Off Turn the Steady Shot indication on/off. Focus Mode On / Off Turn the focus operation mode indication on/off.
TC/UB SET Menu TC/UB SET Menu items Subitems and setting values Contents Timecode Mode Preset / Regen / Clock Setting the timecode Set the timecode mode. Preset: To start the timecode from the specified value Regen (regeneration): To continue the timecode during recording only. When you insert another SxS memory card, the camcorder starts next recording so that the timecode continues from the last recorded timecode on the card.
TC/UB SET Menu items Subitems and setting values Contents TC Format DF / NDF Set the timecode format. DF: Drop frame NDF: Non drop frame Setting the time code format Note The current video format/frame frequency determines whether the mode is fixed either to DF or NDF (see below), regardless of the TC Format setting. Frame setting TC Format 59.94i 59.94P 29.97P 23.98P 1) SP 1440/23.98P HD420 HQ/720/ 23.98P 23.98P HQ 1920/23.98P HQ1440/23.98P HQ 1280/23.98P HD422 50/1080/ 23.98P HD420 HQ/1080/ 23.
OTHERS Menu OTHERS Menu items Subitems and setting values Contents All Reset Execute/Cancel Select “Execute” to reset the camcorder to the factory status. Resetting to the factory status Camera Data Storing/recalling the menu settings Store Execute/Cancel When you select “Execute” to store the setting values, the setup file is stored to one of the following directories.
OTHERS Menu items Subitems and setting values Contents Assign Button PMW-100: <1> to <4> PMW-200: <1> to <5> Assigning Off / Zebra / Peaking / Marker / functions to the Last Clip DEL / ATW / ATW assignable buttons Hold / Rec Review / Rec / Picture Cache / Freeze Mix / Expanded Focus / Spotlight / Backlight / IR Remote / Shot Mark1 / Shot Mark2 / VF Mode / BRT Disp / Histogram / Lens Info / OK Mark / NightShot (PMW-100 only) / Clip Flag OK / Clip Flag NG / Clip Flag Keep / Clip Continuous Rec / LCD/ VF Adj
OTHERS Menu items Subitems and setting values Contents Tally Front High / Low / Off Setting the tally lamps Hours Meter Hours (Sys) The non-resettable accumulated time of use is displayed. Displaying the hours meter Hours (Reset) The resettable accumulated time of use is displayed. Reset Execute/Cancel Select “Execute” to reset the Hours (Reset) value to 0.
OTHERS Menu items Subitems and setting values Contents System Country NTSC Area / NTSC(J) Area / PAL Area Select the area of use and setup ON/OFF setting. NTSC Area: Setup ON NTSC(J) Area: Setup OFF PAL Area: Setup OFF Note The default setting is different among the sales areas. United States and Canada: NTSC Area Other areas: PAL Area UDF/FAT UDF / FAT Switch the file system between UDF/FAT. HD/SD HD / SD Switch between HD Mode and SD Mode for recording/ playback.
OTHERS Menu items Subitems and setting values Contents Clip Auto Naming C**** / Title / Plan Select the method to specify clip names. C****: UDF only Title: To specify as desired by “Title Prefix” Plan: To use a name specified in planning metadata (if no name is specified in planning metadata, the name specified by “Title Prefix” is used.) Title Prefix nnn_ (nnn=least three digits of the serial number) (Max.
OTHERS Menu items Subitems and setting values Contents Unlock All Clips Execute/Cancel Select “Execute” to remove protection from all clips. (UDF only) Index Picture Pos 0sec to 10sec (0sec) Set the image for viewing thumbnails. This selects the time difference from the start of the clip. Find Mode Clip / Rec Start Set the action for when you press the PREV button/NEXT button. (UDF only) Clip: Move to the start of the current clip/next clip.
OTHERS Menu items Subitems and setting values Contents Properties Execute / Cancel Select “Execute” to display the detailed information of the planning metadata loaded in the camcorder.
OTHERS Menu items Wi-Fi (PMW-200 only) Setting for Wi-Fi connection Note The CBK-WA01 Wi-Fi Adapter is required. Subitems and setting values Contents MAC Address Display the MAC address. Net Config Reset Execute / Cancel Reset the “Network” settings to the preset values. Select “Execute” to reset. Scan Networks Execute / Cancel Scan the available network connections when “Wi-Fi” is set to “Enable.
OTHERS Menu items Subitems and setting values Contents Version (Lens) Vx.xx The current lens version of the camcorder is displayed. (PMW-100 only) Showing the version of the lens Version Up Execute / Cancel Updating this unit Select “Execute” to update the camcorder. Use when updating is required. Note This item cannot be selected when no SxS memory card has been loaded.
Connecting External Devices Connecting External Monitors and Recording Devices To display recording/playback pictures on an external monitor, select the output signal and use an appropriate cable for the monitor to be connected. Output signal from the camcorder can be recorded when a recording device is connected. Regardless of whether the signal is HD or SD, the same status information and menus can be displayed on the external monitor as those on the LCD monitor/EVF screen.
A/V OUT connector (audio/video composite multiconnector) By changing the setting of “SDI/HDMI/i.LINK I/ O Select” (page 88) in the VIDEO SET menu, you can output 2-channel audio and downconverted SD analog composite signals for monitoring. Use the supplied AV connection cable for connection.
To check the connection to the camcorder 1 Set the power switch to ON to turn on the camcorder. A message prompting you to confirm that you wish to enable the USB connection is displayed on the LCD monitor/EVF screen. Note This message will not be displayed while another confirmation message or in-progress message (e.g., for formatting or restoration of an SxS memory card) is shown on the screen. It appears when formatting or restoration is completed.
Connecting via i.LINK (FAT only) When an HDV-compatible video format (SP 1440/59.94i, SP 1440/50i, or SP 1440/23.98P) or a DVCAM-compatible video format (format of SD Mode) is selected, setting “SDI/HDMI/ i.LINK I/O Select” (page 88) in the VIDEO SET menu to “HDV” or “DVCAM” enables signal inputs/outputs via the i.LINK (HDV/DV) connector. You can record the same images as those recorded on an SxS memory card in this camcorder on an external device connected to the i.
Nonlinear Editing When the camcorder is displaying thumbnails or in playback mode, you can transfer an HDV stream to a nonlinear editing system connected via the i.LINK (HDV/DV) connector. 2 Set “SDI/HDMI/i.LINK I/O Select” (page 88) in the VIDEO SET menu to “HDV.” 3 Set “Input Source Select” (page 88) in the VIDEO SET menu to “i.LINK.” The input image is displayed on the LCD monitor/EVF screen and the monitor connected via the VIDEO OUT connector.
FAT External Synchronization Video format Valid reference signal 1080/59.94i NTSC Genlock operation is enabled by supplying a reference signal to the GENLOCK IN connector (page 17) of the camcorder. Valid reference signals depend on the video format selected. When the video format is UDF HD422 50/1080/ 23.98P or HD420 HQ/1080/23.98P, or FAT HQ 1920/23.98P, HQ 1440/23.98P, select either “23.98PsF” or “59.94i (2-3 Pull Down)” in “23.98P Output” (page 89) in the VIDEO SET menu. HQ 1920/59.94i HQ 1920/29.
FAT Video format Valid reference signal HQ 1920/50i HQ 1920/25P HQ 1440/50i HQ 1440/25P SP 1440/50i HQ 1280/50P HQ 1280/25P 1080/50i PAL DVCAM50i SQ/EC DVCAM25P SQ/EC 1080/50i 720/50P PAL 1080/50i PAL The phase adjustment for the reference signal can also be made with “Genlock” (page 96) in the OTHERS menu. Notes • When the output format is SD mode and you use one of the video formats below, genlock is not possible. Set the video format to HD mode. UDF: HD422 50/720/59.94P, HD420 HQ/720/59.
Appendices Important Notes on Operation Use and Storage Do not subject the unit to severe shock • The internal mechanism may be damaged or the body warped. • If an accessory mounted on the accessory shoe is subjected to severe shock, the accessory shoe may be damaged. In such a case, stop using it and contact your dealer or a Sony service representative. Do not cover the unit while operating Putting a cloth, for example, over the unit can cause excessive internal heat build-up.
Note on laser beams Laser beams may damage the CMOS image sensors. If you shoot a scene that includes a laser beam, be careful not to let the laser beam be directed into the lens of the camcorder. About the LCD panels The LCD panels are manufactured with extremely high-precision technology that yields effective pixel rates of 99.99% or higher. However, very rarely, one or more pixels may be permanently dark or permanently lit in white, red, blue, or green. This phenomenon is not a malfunction.
Formats and Limitations of Outputs Video Formats and Output Signals Output formats for the SDI OUT connector Serial digital signals from the SDI OUT connector are output depending on the settings of the setup menu and format of the clip being played. The output format is converted when using the settings in the following chart. Notes • When the format is UDF HD Mode or FAT HD Mode and “SDI/HDMI/i.LINK I/O Select” in the VIDEO SET menu is set to “SD SDI & SD HDMI i,” a down-converted SD signal is output.
When a thumbnail screen is displayed “Format” in “System” in the OTHERS menu HD422 50/1080/23.98P HD420 HQ/1080/23.98P HQ 1920/23.98P HQ 1440/23.98P (23.98P Output:59.94i (2-3 Pull Down)) HD422 50/720/50P HD420 HQ/720/50P HQ 1280/50P Output format Setting of “SDI/HDMI/i.LINK I/O Select” in the VIDEO SET menu HD SDI & HD HDMI SD SDI & SD HDMI i SD/59.94i 1920×1080/59.94i 1) 1280×720/50P SD/50i 2) 1) 59.94i provided through 2-3 pulldown of 23.98P. 2) 50i provided through conversion from 50P.
Output formats from the HDMI OUT connector Serial digital signals from the HDMI OUT connector are output depending on the settings of the setup menu and format of the clip being played. The output format is converted when using the settings in the following chart. Note When the format is UDF HD Mode or FAT HD Mode and “SDI/HDMI/i.LINK I/O Select” in the VIDEO SET menu is set to “SD SDI & SD HDMI i,” a down-converted SD signal is output.
When a thumbnail screen is displayed Output format “Format” in “System” in the OTHERS menu HD422 50/1080/23.98P HD420 HQ/1080/23.98P HQ 1920/23.98P HQ 1440/23.98P (23.98P Output: 59.94i (2-3 Pull Down)) Setting of “SDI/HDMI/i.LINK I/O Select” in the VIDEO SET menu HD SDI & HD HDMI SD SDI & SD HDMI i SD HDMI P & HDV HD HDMI & HDV SD HDMI i & HDV SD HDMI P SD HDMI i & DVCAM SD/59.94i SD/59.94P 1920×1080/59.94i 1) 1) 59.94i provided through 2-3 pulldown of 23.98P.
When you play clips recorded with the NTSC system while the “Country” is set to “PAL Area.” Some frames may be deleted due to frame rate conversion. Playback clip video format HD422 50/1080/59.94i HD420 HQ/1080/59.94i HQ 1920/59.94i HQ 1440/59.94i SP 1440/59.94i HD422 50/1080/29.97P HD420 HQ/1080/29.97P HQ 1920/29.97P HQ 1440/29.97P HD422 50/1080/23.98P HD420 HQ/1080/23.98P HQ 1920/23.98P HQ 1440/23.98P SP 1440/23.98P HD422 50/720/59.94P HD420 HQ/720/59.94P HQ 1280/59.94P HD422 50/720/29.97P HQ 1280/29.
Output formats from the i.LINK I/O connector Serial digital signals from the i.LINK I/O connector are output in the following formats depending on the settings of the setup menu and format of the clip being played. Note When “SDI/HDMI/i.LINK I/O Select” in the VIDEO SET menu is set to “HD SDI & HD HDMI,” “SD SDI & SD HDMI i,” or “SD HDMI P,” signals are not output from the i.LINK I/O connector.
Limitations of Inputs/Outputs The outputs from the camcorder are limited by the menu settings as follows: ×: no signal Menu setting System UDF/ HD/SD FAT Output SDI/HDMI/ SDI HDMI i.LINK I/O OUT OUT Select UDF HD SDI & HD HDMI HD SD SDI & SD HDMI i FAT HD HD/HQ HD/SP Appendices 118 Input A/V Out i.LINK i.
Menu setting System UDF/ HD/SD FAT Output SDI/HDMI/ SDI HDMI i.LINK I/O OUT OUT Select UDF HD SDI & HD HDMI × SD SDI & SD HDMI i FAT SD Input A/V Out i.LINK i.
Backup Battery Replacement This camcorder uses a backup battery to retain various setting data. A lithium battery (CR2032) for backup is mounted in the camcorder at the factory. The backup battery retains the date, time, and timecode in Free Run mode even when no operating power is being supplied. CR20 3V 2 25 Insert a new backup battery (CR2032) with the + symbol on the battery facing outside.
Troubleshooting Power Symptoms Cause Remedy The camcorder does not power on when you set the power switch to ON. No battery pack is mounted and no power is supplied to the DC IN connector. Mount a battery pack (page 21) or connect to AC power using the BC-U1 or BC-U2 (page 22). The battery pack is completely exhausted. Replace the battery pack with a fully charged one (page 21). The power supply cuts while operating. The battery pack becomes exhausted.
External Devices Symptoms Cause The equipment connected It sometimes takes time for the to the camcorder via an connected equipment to recognize i.LINK connection does the operation. not react as expected, for example, no picture appears on its screen. Appendices 122 Troubleshooting Remedy Wait for about 15 seconds. If the connected equipment still does not react, do the following: • Check the i.LINK cable, for example, by replugging it. • Turn the power off, and connect the cable again.
Error/Warning Indications The camcorder informs you of situations where warning, caution, or an operation check is required, through messages on the LCD monitor/EVF screen, the tally lamps, and a buzzer. The buzzer is output to the built-in speaker or to the headphones connected via the headphone connector. The buzzer volume can be set with “Alarm Level” in “Audio Output” (page 87) in the AUDIO SET menu. Error Indications The camcorder stops operation after the following indications.
Warning indication on LCD/EVF Buzzer Battery Error Please Change Battery Backup Battery End Please Change Unknown Media(A)2) Please Change Media Error Media(A)2) Needs to be Restored Media Error Cannot Record to Media(A)2) Media Error Cannot Use Media(A)2) Will Switch Slots Soon No Clip Cannot Use Media(A)2) Unsupported File System Cannot Use Media(A)2) In UDF Mode Same File Already Exists Change Media(A)2) Video Format Mismatch Copy Protected Input Cannot Record Appendices Media Error Playback Halt
Warning indication on LCD/EVF Buzzer Reached Clip Number Limit Copy Completed to xx/xx Not Enough Capacity Copy Completed to xx/xx Reached Duplication Limit Copy Completed to xx/xx Copy Error! (CANCEL:Abort) No Media! Copy Error! (CANCEL:Abort) Media Write Protected Copy Error! (CANCEL:Abort) Cannot Use Media(A)2) Copy General Files NG: Cannot Copy File System Mismatch Tally lamps Cause and measures The maximum number of clips for 1 memory card is reached, so copying cannot continue.
Licenses MPEG-2 Video Patent Portfolio License ANY USE OF THIS PRODUCT OTHER THAN CONSUMER PERSONAL USE IN ANY MANNER THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, L.L.C., 250 STEELE STREET, SUITE 300, DENVER, COLORADO 80206.
About OpenSSL Because it uses the OpenSSL Toolkit, this product uses software developed by the OpenSSL Project (http://www.openssl.org/). OpenSSL License --------------- 5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. 6.
============================ ======= * * This product includes cryptographic * software written by Eric Young * (eay@cryptsoft.com). This product * includes software written by Tim * Hudson (tjh@cryptsoft.com). * * / Original SSLeay License ----------------------- Appendices 128 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.
* * * * * * * * * * * * * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.
Specifications General Mass PMW-200 Approx. 2.3 kg (5 lb 1.1 oz) (Camcorder only) Approx. 2.7 kg (5 lb 15 oz) (With lens hood (1), eyecup (1), battery pack BPU30 (1), SxS memory card (1)) PMW-100 Approx. 1.5 kg (3 lb 4.9 oz) (Camcorder only) Approx. 1.8 kg (3 lb 15 oz) (With lens hood (1), eyecup (1), battery pack BPU30 (1), SxS memory card (1)) Dimensions PMW-200 Approx. W172 mm × H164 mm × D419 mm (6 7/8 × 6 1/2 × 16 1/2 inches) (Outermost dimensions.
FAT HQ 1920 mode: MPEG-2 MP@HL, 35Mbps / VBR HQ 1440 mode: MPEG-2 MP@HL, 35Mbps / VBR HQ 1280 mode: MPEG-2 MP@HL, 35Mbps / VBR SP 1440 mode: MPEG-2 MP@H-14, 25 Mbps / CBR DVCAM mode: DVCAM Recording format (audio) UDF HD422 mode: LPCM (24-bit, 48 kHz, 4 channels) Other modes: LPCM (16-bit, 48 kHz, 4 channels) FAT HD Mode: LPCM (16-bit, 48 kHz, 4 channels) SD Mode: LPCM (16-bit, 48 kHz, 2 channels) Recording frame rate FAT HQ 1920 mode: MPEG-2 MP@HL, 35Mbps / VBR 1920 × 1080/59.94i, 50i, 29.97p, 25p, 23.
When using SBP-64 / SBS-64G1A (64GB): Approx. 280 minutes When using SBP-32 / SBS-32G1A (32GB): Approx. 140 minutes When using SBP-16 (16GB): Approx. 70 minutes DVCAM mode When using SBP-64 / SBS-64G1A (64GB): Approx. 260 minutes When using SBP-32 / SBS-32G1A (32GB): Approx. 130 minutes When using SBP-16 (16GB): Approx. 65 minutes Note These approximate playback times depend on operating conditions, available memory, etc.
Minimum subject illumination PMW-200: 0.12 lx (typical) (1920 × 1080/59.94i, F1.9, +18 dB, 64-frame accumulation) PMW-100: 0.40 lx (typical) (1920 × 1080/59.94i, F1.8, +18 dB, 64-frame accumulation) Shutter speed 1/32 ~ 1/2000 sec. Slow Shutter (SLS/EX SLS) 2, 3, 4, 5, 6, 7, 8, 16, 32, 64 frames Slow & Quick Motion 720p: 1 ~ 60 frames, 1 ~ 50 frames (for PAL Area, UDF) 1080p: 1 ~ 30 frames, 1 ~ 25 frames (for PAL Area, UDF) SDI output BNC type (1), switchable with HD-SDI/ SD-SDI SMPTE292M/259M i.
Displays Viewfinder PMW-200: 0.45-inch color LCD: 852 (H) × 480 (V), 16:9 PMW-100: 0.24-inch color LCD: 392 (H) × 224 (V), 16:9 LCD monitor 3.5-inch color LCD monitor: 852 (H) × 3 (RGB) × 480 (V), 16:9 Internal Microphone Internal microphone Omnidirectional stereo electret condenser microphone Media Slot Block Type ExpressCard/34 (2) This is pre-installed to the IR Remote Commander.
SBAC-US10 Media Adaptor QDA-EX1 (for XQD memory cards) MEAD-MS01 (for “Memory Stick PRO-HG Duo” HX series) MEAD-SD01 (for SDHC cards) Electret condenser microphone ECM-673, ECM-MS2 Wireless microphone UWP-V1*, UWP-V2* Wide-conversion lens VCL-HG0737K (PMW-100) VCL-EX0877 (PMW-200) Hard disk unit PHU-220R* Memory recording unit HVR-MRC1K* * To attach accessories to the rear accessory shoe, use the optional cold shoe kit (part no.: X-2546633-1). Design and specifications are subject to change without notice.
Index Numerics 23.
Exposure 41, 85 ExpressCard slot 104 External Hard Disk 27 External Input Signals 107 External Monitors 103 External Synchronization 108 eyepiece focusing knob 23 F Flicker Reduce 44, 82 Flickers 44 Focus 42 Format 30, 97 Format Media 99 Frame Recording 48, 83 FULL AUTO button 36 Full Auto mode 36 Full MF mode 42 G Gain 40 Gain Setup 80 Gamma 57 Genlock 96 GENLOCK IN connector 108 H handle ZOOM button 42 HD Detail 55 HD/SD 97 HDMI OUT connector 103 headphone connector 46 Histogram indication 20 Hours Met
P P.Cache Rec 83 PAUSE 71, 72 Peaking 42, 89 PEAKING button 42 PHU-220R 27 Picture Cache Recording 50 Picture Profiles 52 Plan.
Wide Conversion 43, 85 wide-conversion lens 43 Wi-Fi 101 Wi-Fi Adapter 32 X XQD Memory Cards 29 Z Zebra 40, 90 zebra pattern 40 Zoom 41 Zoom Speed 42, 82 Zoom Transition 82 Appendixes Index 139