Operation Manual

13
Names and functions of parts
NOTE
The MONITOR OUT A jacks can be set to output
the same signals as the MASTER OUT jacks or the
signals set separately in the fader mode section.
(
→
P.31)
3
MONITOR OUT A PHONES jack
This headphone jack outputs signals after volume
adjustment by the MONITOR OUT A PHONES
knob.
NOTE
The MONITOR OUT A PHONES jack always out-
puts the same signals as the MONITOR OUT A
jacks.
4
MONITOR OUT B–E PHONES jacks
These headphone jacks output signals after
volume adjustments by the MONITOR OUT B–E
PHONES knobs.
NOTE
The MONITOR OUT B–E jacks can be set to output
the same signals as the MASTER OUT jacks or the
signals set separately in the fader mode section.
(
→
P.31)
5
MONITOR OUT A knob
Use to adjust the volume of the signals output
from the MONITOR OUT A jacks.
6
MONITOR OUT A PHONES knob
Use to adjust the volume of the signals output
from the MONITOR OUT A PHONES jack.
7
MONITOR OUT B–E knobs
Use to adjust the volumes of the signals output
from the MONITOR OUT B–E PHONES jacks.
8
MONITOR OUT A switch
This switches MONITOR OUT A output between
the L/R jacks and the PHONES jack.
Status Explanation
MASTER (
)
The same signals as the
MASTER OUT are output.
A (
) The signals set in the
FADER MODE section are
output.
9
MONITOR OUT B–E switches
These switch the signals output from the MONI-
TOR OUT B–E PHONES jacks.
Status Explanation
MASTER (
)
The same signals as the
MASTER OUT are output.
B–E (
) The signals set in the
FADER MODE section are
output.
!
MASTER REC/PLAY button
Use this button to switch between recording the
signal input on the master bus to the SD card
and playing back an already recorded file from
the SD card.
Status Explanation
Lit red The signal will be recorded to the
SD card after adjustment by the
master fader.
Lit green The playback signal of a file is in-
serted on the master bus. The REC/
PLAY buttons of other channels will
be unlit at this time.
Unlit Files will neither be recorded nor
played back.
"
MASTER MUTE button
This mutes or unmutes the MASTER OUT jacks.
To mute the signals, press this button to light it.
#
Master level meters
These show the signal levels output from the
MASTER OUT jacks in a range from −48 dB to 0
dB.
$
Master fader
This adjusts the signal levels output from the
MASTER OUT jacks in a range from −∞ to +10
dB.
NOTE
If the actual channel fader position differs from the
channel fader position recalled using the scene
function, for example, the level meters will show
the recalled fader position.