Operation Manual

15
Names and functions of parts
① ② ③ ④ ⑥ ⑦ ⑧ ⑨⑤
1
POWER switch
This turns the
on and off.
Switch to — to turn the power on. Switch to
to turn the power off.
When the POWER switch setting is changed to
OFF, the current mixer settings are automatically
saved in the unit and in the settings file in the
project folder on the SD card.
2
DC IN 12V AC adapter connector
Connect the included AC adapter here.
3
USB HOST port
This USB 2.0 HOST port is for connecting USB
ash drives.
Projects and audio files can be saved on and
loaded from connected USB ash drives.
4
MODE switch
Set whether to use as a USB HOST, card reader
or audio interface.
This cannot be changed after starting up.
5
USB DEVICE port
This USB 2.0 port is for connecting with a com-
puter.
It will start up as a card reader or audio interface,
depending on the MODE switch selection.
Card reader mode
Operating as an SD card reader, data can be ex-
changed with a computer.
Audio interface mode
Operating as an audio interface, audio data can
be exchanged with a computer.
Inputs: The signals from channels 1–12 after they
pass through their compressors and the master
fader output signals are input to the computer.
Outputs: Outputs from the computer can be as-
signed to channels 9/10 and 11/12.
Use when connected to an iOS device is possi-
ble if the CLASS COMPLIANT MODE switch is
set to ON.
6
CLASS COMPLIANT MODE switch
Use this to turn Class Compliant Mode ON/OFF.
Set it to ON when connected to an iOS device.
7
SAMPLE RATE switch
Set the sampling rate used by the unit.
This cannot be changed after starting up.
8
SD card slot
This slot is for SD cards.
The
supports SD, SDHC and SDXC card
specications.
You can test whether an SD card can be used with
the
. (
→
P.83)
HINT
9
CONTROL IN jack
A footswitch (ZOOM FS01) can be connected
here.
The footswitch can be assigned to one function:
starting/stopping recorder playback, manually
punching in/out or muting/unmuting the built-in
effect. (
→
P.86)
Rear panel