Operation Manual

Mixer

Selecting MONITOR OUT A–E output signals

1. Use the MONITOR OUT switch for an output to select its output signal.

To output a mix set using MONITOR OUT A–E:

Set MONITOR OUT switch to A–E ( )

To output the same mix as the MASTER:

Set MONITOR OUT switch to MASTER ( )

Output different mixes for MONITOR OUT A–E

Output same mix as MASTER

NOTE

• Each output mix is saved with the scene and project.

• MONITOR OUT A–E do not output send-return effect signals.

• The parameters that can have separate settings for the MASTER and MONITOR OUT A–E are as follows.

- Fader positions (each channel)

Copying a mix

1. While pressing the button ( or – ) for the output you want

to copy for at least 2 seconds, press a blinking copy destination button

(

or – ).

This copies the mix from the source to the destination.