Operation Manual

44
Recording and playback
3. Press repeatedly to return to the main recorder screen.
The MASTER level meters will blink at the level that will cause automatic recording to
start.
4. Press .
The indicator will light and recording standby will start.
Recording starts automatically when the input exceeds the set level (shown by the MASTER level meters).
You can also set recording to stop automatically when the input goes below a set level. (
→
P.79)
HINT
5. Press to end recording standby or stop recording.
NOTE
• This function cannot be used with the PRE REC, METRONOME or PRE COUNT functions. When you turn
AUTO REC on, these other functions will be disabled.
• When you turn OVER DUB on, AUTO REC will be disabled.