Operation Manual

Recording and playback

Selecting projects for playback

Projects saved on SD cards can be loaded.

1. Select MENU > PROJECT > SELECT.

2. Use to select the project you want to load, and press .

NOTE

• Projects in different folders cannot be selected. To select a project that is saved in a different folder, select

that folder rst. (

→

P.46)

• When a project is loaded, the mixer settings saved in that project are also loaded.

• If actual channel fader positions differ from the channel fader positions of the loaded project, the level me-

ters will show the recalled fader positions. The volume will not be changed until the actual fader position

becomes the same as the recalled position.

• When switching to a different project, the project mixer settings of the current project are saved to the

settings le in the project folder.