Operation Manual
50
Using the metronome
Setting the precount
A metronome count can be sounded before starting recording/playback.
1. Select MENU > METRONOME > PRE COUNT.
2. Use to select the precount behavior, and press .
Setting value Explanation
OFF No precount will sound.
1–8 Before recording/playback, the precount will sound for the set
number of times (1–8).
SPECIAL Before recording/playback, the precount will sound as shown
below.
NOTE
• The precount is enabled even during playback.
• This function cannot be used with the AUTO REC function. When you turn AUTO REC on, PRE COUNT will
be disabled.
• This function cannot be used with the PRE REC function. When you turn PRE COUNT on, PRE REC will be
disabled.