Operation Manual
74
Using audio interface functions
Connecting to a computer
POWER
switch
USB DEVICE
port
MODE switch
1. Use a USB cable to connect the USB DEVICE port to the computer.
2. Set the switch to AUDIO INTERFACE.
3. Set to ON.
NOTE
• Set to ON when connected to an iOS device.
• When connecting to an iOS device, use a Lightning to USB camera adapter (or Lightning to USB 3 camera
adapter).
4. Set the as the computer sound device.
NOTE
• See the Installation Guide included in the driver package for procedures to set the sound device in different
operating systems.
• Audio interface functions cannot be used when the sampling rate is set to 96 kHz.