Operation Manual

8
Names and functions of parts
②
③
④
⑤
⑥
⑦
①
⑧
1
EQ OFF button
When this button is lit, HIGH, MID, LOW and
LOW CUT are bypassed.
2
HIGH knob
This adjusts the boost/cut of high-frequency
equalization.
Type: shelving
Gain range: −15 db – +15 dB
Frequency: 10 kHz
3
MID FREQ knob
This adjusts the central frequency of the mid
frequency equalization.
Frequency (in Hz): 100, 140, 200, 250, 315, 500,
800, 1k, 1.3k, 2k, 3k, 5k or 8k
4
MID knob
This adjusts the boost/cut of mid-frequency
equalization.
Type: peaking
Gain range: −15 db – +15 dB
Frequency: set by MID FREQ knob
5
LOW knob
This adjusts the boost/cut of low-frequency
equalization.
Type: shelving
Gain range: −15 db – +15 dB
Frequency: 100 Hz
6
LOW CUT button
This turns on/off the high-pass lter, which cuts
low frequencies.
When ON, signals below 75 Hz are attenuated
12 dB/octave.
7
SEND EFX knob
The amount that can be sent to the SEND EFX
bus can be set from −∞ to +10 dB.
8
PAN knob
Use to adjust the channel volume balance and
stereo position sent to the master bus.
On a stereo input channel, this adjusts the
volume balance between the left and right chan-
nels.
CHANNEL STRIP section