Operation Manual

80
Recording and playback settings
Enabling latency adjustment
When overdubbing, adjustment can be made for the delay caused by ana-
log-to-digital conversion, signal processing and digital-to-analog conversion.
1. Open MENU > REC/PLAY > LATENCY ADJUST.
2. Use to select ON, and press .
Showing recording levels on level meters
The signals of levels recorded to the recorder or recorded to a computer when
using the audio interface function can be shown on the level meters of each
channel.
1. Open MENU > REC/PLAY > REC LEVEL METER.
2. Use to select ON, and press .
If recorded signal levels are higher than post fader levels, the recorded signal levels are
shown lit dimly on the level meters.