Quick Start Guide

11
Preparing to record
The manages recording and playback data in units called projects.
2, 3, 4
2
3, 4
2
1. After setting to OFF, open the SD card
slot cover, and insert an SD card all the way
into the slot.
To remove an SD card, push it further into the slot and
then pull it out.
2. Press and so they light.
This opens the SETTING screen.
3. Select PROJECT > NEW PROJECT.
Move cursor: Turn
Confirm: Press
4. Use to select YES, and press .
NOTE
• See the Operation Manual for information about formatting SD cards.
• Use an SD card that is Class 10 or higher.
• FormatanSDcardbeforerecordingtoitat96kHz.Withoutformattingrst,skippingcould
occur when recording.
• When a new project is created, it will start with the current mixer settings.
Creating new projects