User manual

SCENE section
①
ON button
②
RESET button
③
1–9 buttons
④
RECALL button
⑤
SAVE button
①
ON button
Press this button, lighting it, to use the scene function
②
RESET button
Press this button to reset the current mixer settings to the factory defaults.
③
1–9 buttons
Use these buttons to select the scene to use to save the current mixer state and to load saved scenes.
If the current mixer settings match the settings of a scene, the corresponding number button will light.
This unit can save up to 9 scenes.
④
RECALL button
Use this button when loading scenes saved to buttons 1–9.
When this button is pressed, buttons 1–9 will blink if they have saved scenes and be unlit if they do not.
To recall a saved scene, press a blinking button between 1 and 9. To cancel recalling a scene, press the
RECALL button again.
⑤
SAVE button
Use this button when saving the current mixer settings to a scene.
When this button is pressed, buttons 1–9 will light if they have saved scenes and be blink if they do not.
To save a scene, press a button between 1 and 9 to save it to that number. To cancel saving a scene,
press the SAVE button again.
13