User manual
Table Of Contents
- Usage and Safety Precautions
- Names and functions of parts
- Equipment connection example
- Display overview
- Turning the unit on/off
- Using the MENU screen
- Mixer
- Recording and playback
- Using the metronome
- Using the slate mic
- Projects
- Audio files
- Using audio interface functions
- Using card reader functions
- Recording and playback settings
- SD card settings
- Various settings
- Troubleshooting
- Specifications
- Send effects specifications
- Mixer block diagram
- Usage and Safety Precautions
- Names and functions of parts
- Equipment connection example
- Display overview
- Turning the unit on/off
- Using the MENU screen
- Mixer
- Recording and playback
- Using the metronome
- Using the slate mic
- Projects
- Audio files
- Using audio interface functions
- Using card reader functions
- Recording and playback settings
- SD card settings
- Various settings
- Troubleshooting
- There is no sound or output is very quiet
- Recorded audio is too loud, too quiet or silent
- Recording not possible
- Playback sound cannot be heard or is quiet
- The sounds of devices connected to input jacks are distorted
- The send effect is not working
- There is no sound or output is very quiet from MONITOR OUT A–E
- Cannot select or use the L-12 device
- Sound skips during playback or recording
- Cannot play or record
- There is no sound or output is very quiet
- Specifications
- Send effects specifications
- Mixer block diagram
Output section
①
MASTER OUT jacks
②
MONITOR OUT A jacks
③
MONITOR OUT A PHONES jack
④
MONITOR OUT B–E PHONES
jacks
⑤
MONITOR OUT A knob
⑥
MONITOR OUT A PHONES knob
⑦
MONITOR OUT B–E knobs
⑩
MASTER REC/PLAY button
⑪
MASTER MUTE button
⑧
MONITOR OUT A switch
⑨
MONITOR OUT B–E
switches
⑫
Master level meters
⑬
Master fader
①
MASTER OUT jacks
These jacks output signals after volume adjustment by the master fader.
Connect them to a power amplifier, a PA system or speakers with built-in amplifiers, for example.
These support balanced output with XLR connectors (2 HOT).
②
MONITOR OUT A jacks
These jacks output signals after volume adjustment by the MONITOR OUT A knob.
You can, for example, connect a monitoring system for the mixer operator here.
These support balanced 1/4-inch jack phone output.
NOTE
The MONITOR OUT A jacks can be set to output the same signals as the MASTER OUT jacks or the sig-
nals set separately in the fader mode section. (→ Selecting MONITOR OUT A–E output signals)
③
MONITOR OUT A PHONES jack
This headphone jack outputs signals after volume adjustment by the MONITOR OUT A PHONES knob.
NOTE
The MONITOR OUT A PHONES jack always outputs the same signals as the MONITOR OUT A jacks.
16