User manual

④
MONITOR OUT B–E PHONES jacks
These headphone jacks output signals after volume adjustments by the MONITOR OUT B–E PHONES
knobs.
NOTE
The MONITOR OUT B–E jacks can be set to output the same signals as the MASTER OUT jacks or the
signals set separately in the fader mode section. (→ Setting signals output from MONITOR OUT A–E)
⑤
MONITOR OUT A knob
Use to adjust the volume of the signals output from the MONITOR OUT A jacks.
⑥
MONITOR OUT A PHONES knob
Use to adjust the volume of the signals output from the MONITOR OUT A PHONES jack.
⑦
MONITOR OUT B–E knobs
Use to adjust the volumes of the signals output from the MONITOR OUT B–E PHONES jacks.
⑧
MONITOR OUT A switch
This switches MONITOR OUT A output between the L/R jacks and the PHONES jack.
Status Explanation
MASTER (
) The same signals as the MASTER OUT are output.
A (
) The signals set in the FADER MODE section are output.
⑨
MONITOR OUT B–E switches
These switch the signals output from the MONITOR OUT B–E PHONES jacks.
Status Explanation
MASTER (
) The same signals as the MASTER OUT are output.
B-E(
) The signals set in the FADER MODE section are output.
⑩
MASTER REC/PLAY button
Use this button to switch between recording the signal input on the master bus to the SD card and play-
ing back an already recorded file from the SD card.
Status Explanation
Lit red The signal will be recorded to the SD card after adjustment by the master fader.
Lit green
The playback signal of a file is inserted on the master bus. The REC/ PLAY buttons
of other channels will be unlit at this time.
Unlit Files will neither be recorded nor played back.
⑪
MASTER MUTE button
This mutes or unmutes the MASTER OUT jacks.
To mute the signals, press this button to light it.
⑫
Master level meters
These show the signal levels output from the MASTER OUT jacks in a range from −48 dB to 0 dB.
17