User manual
Table Of Contents
- Usage and Safety Precautions
- Names and functions of parts
- Equipment connection example
- Display overview
- Turning the unit on/off
- Using the MENU screen
- Mixer
- Recording and playback
- Using the metronome
- Using the slate mic
- Projects
- Audio files
- Using audio interface functions
- Using card reader functions
- Recording and playback settings
- SD card settings
- Various settings
- Troubleshooting
- Specifications
- Send effects specifications
- Mixer block diagram
- Usage and Safety Precautions
- Names and functions of parts
- Equipment connection example
- Display overview
- Turning the unit on/off
- Using the MENU screen
- Mixer
- Recording and playback
- Using the metronome
- Using the slate mic
- Projects
- Audio files
- Using audio interface functions
- Using card reader functions
- Recording and playback settings
- SD card settings
- Various settings
- Troubleshooting
- There is no sound or output is very quiet
- Recorded audio is too loud, too quiet or silent
- Recording not possible
- Playback sound cannot be heard or is quiet
- The sounds of devices connected to input jacks are distorted
- The send effect is not working
- There is no sound or output is very quiet from MONITOR OUT A–E
- Cannot select or use the L-12 device
- Sound skips during playback or recording
- Cannot play or record
- There is no sound or output is very quiet
- Specifications
- Send effects specifications
- Mixer block diagram
RECORDER section
①
Slate mic
⑦
STOP button
⑩
REW button
⑪
FF button
②
SLATE button/indicator
③
Display
④
MENU button
⑤
Selection encoder
⑥
TEMPO button/indicator
⑧
PLAY/PAUSE button/indicator
⑨
REC button/indicator
⑫
OVER DUB button/indicator
①
Slate mic
This is a built-in mic for recording comments.
This mic input is active while the SLATE button is being pressed.
The input channel can be set to channels 1–12, MASTER, or all channels. (→ Changing the slate mic
routing)
②
SLATE button/indicator
This activates the slate mic.
The slate mic is activated while this button is being pressed and its indicator is lit.
③
Display
This shows the recorder status and MENU screen.
④
MENU button
This opens the menu.
⑤
Selection encoder
Use this to change menus and values and to move between items.
Operation Result
Turn when main recorder
screen open
Search forward or backward in one-second increments.
Push when main recorder
screen open
This sets a mark.
Turn when menu open Move between parameters and change values.
Press when menu open Confirm parameter value.
⑥
TEMPO button/indicator
This sets the tempo of the metronome built into the recorder.
Press this button to make the recorder detect the tempo from the average value.
19