User manual

ManualsBrandsZoom ManualsAudio InterfacesCombined mixer, audio interface and recorder

Table Of Contents

Usage and Safety Precautions
- Introduction
Names and functions of parts
- Top
- Rear panel
Equipment connection example
- Live PA system
Display overview
- Home Screen
Turning the unit on/off
- Turning the unit on
- Turning the power off
Using the MENU screen
Mixer
- Outputting input sounds from output devices
- Adjusting the tone and panning
- Using the built-in effects
- Using scene functions
- Setting signals output from MONITOR OUT A–E
Recording and playback
- Preparing to record
- Recording and playing tracks
- Adding marks
- Redoing parts of recordings (punching in/out)
- Mixing down tracks
- Recording automatically
- Capturing audio before recording starts
- Selecting the folder where projects are saved
- Selecting projects for playback
Using the metronome
- Enabling the metronome
- Changing metronome settings
Using the slate mic
- Recording with the slate mic
- Changing slate mic settings
Projects
- Changing project names
- Deleting projects
- Protecting projects
- Checking project information
- Saving projects to USB flash drives
- Importing projects from USB flash drives
- Managing marks
Audio files
- Deleting audio files
- Exporting audio files to USB flash drives
- Importing audio files from USB flash drives
Using audio interface functions
- Installing the driver
- Connecting to a computer
- Inputting return signals from the computer to a stereo channel
Using card reader functions
Recording and playback settings
- Changing the recording format
- Changing automatic recording settings
- Showing recording levels on level meters
- Enabling latency adjustment
- Changing the playback mode
SD card settings
- Checking the open space on SD cards
- Formatting SD cards
- Testing SD card performance
Various settings
- Setting the date and time
- Setting the footswitch
- Changing the sampling rate
- Disabling the automatic power saving function
- Adjusting the display contrast
- Restoring settings to factory defaults
- Checking the firmware versions
- Updating the firmware
Troubleshooting
Specifications
Send effects specifications
Mixer block diagram
Usage and Safety Precautions
- Introduction
Names and functions of parts
- Top
- Rear panel
Equipment connection example
- Live PA system
Display overview
- Home Screen
Turning the unit on/off
- Turning the unit on
- Turning the power off
Using the MENU screen
Mixer
- Outputting input sounds from output devices
  - Outputting sound from speakers
  - Outputting sound from headphones
- Adjusting the tone and panning
- Using the built-in effects
- Using scene functions
- Setting signals output from MONITOR OUT A–E
Recording and playback
- Preparing to record
  - Inserting SD cards
  - Creating new projects
- Recording and playing tracks
  - Recording
  - Playing recordings
- Adding marks
  - Adding marks during recording and playback
  - Moving in mark order
- Redoing parts of recordings (punching in/out)
- Mixing down tracks
  - Recording to the master track
  - Playing the master track
- Recording automatically
- Capturing audio before recording starts
- Selecting the folder where projects are saved
- Selecting projects for playback
Using the metronome
- Enabling the metronome
- Changing metronome settings
Using the slate mic
- Recording with the slate mic
- Changing slate mic settings
  - Changing the slate mic volume
  - Changing the slate mic routing
Projects
- Changing project names
- Deleting projects
- Protecting projects
- Checking project information
- Saving projects to USB flash drives
- Importing projects from USB flash drives
- Managing marks
Audio files
- Deleting audio files
- Exporting audio files to USB flash drives
- Importing audio files from USB flash drives
Using audio interface functions
- Installing the driver
- Connecting to a computer
- Inputting return signals from the computer to a stereo channel
Using card reader functions
Recording and playback settings
- Changing the recording format
- Changing automatic recording settings
  - Setting the automatic recording start level
  - Setting automatic stopping
- Showing recording levels on level meters
- Enabling latency adjustment
- Changing the playback mode
SD card settings
- Checking the open space on SD cards
- Formatting SD cards
- Testing SD card performance
  - Conducting a quick test
  - Conducting a full test
Various settings
- Setting the date and time
- Setting the footswitch
- Changing the sampling rate
- Disabling the automatic power saving function
- Adjusting the display contrast
- Restoring settings to factory defaults
- Checking the firmware versions
- Updating the firmware
Troubleshooting
- There is no sound or output is very quiet
Specifications
Send effects specifications
Mixer block diagram

Display overview

Home Screen

①

⑨ ⑩

⑤

⑥ ⑧⑦

⑫

⑬

⑭

④

②

③

⑪

No Item Explanation

①

Project name

This shows the project name.

"<" appears if there is another project before this one in the folder.

">" appears if there is another project after this one in the folder.

②

Status icon

This shows the status as follows.

: Stopped

: Paused

: Recording

: Playing back

③

Counter This shows the hour: minute: second.

④

Progress bar This bar shows the amount of time in the project from beginning to end.

⑤

Folder name

The folder where the project is saved will be shown as FOLDER01 – FOLD-

ER10.

⑥

PLAY MODE icon

This shows the PLAY MODE setting.(→ Changing the playback mode)

⑦

Metronome icon

This is shown when the metronome is enabled. (→ Enabling the metronome)

⑧

Project protection icon

This is shown when project protection is enabled.(→ Protecting projects)

⑨

Remaining recordable time

This shows the remaining recordable time.

This will change automatically according to the number of channels that have

recording enabled with

⑩

Recording ﬁle format This shows the recording ﬁle format used by the recorder.

⑪

Current date and time This shows the current date and time.

⑫

SD card icon This is shown when an SD card is being recognized.

⑬

Mark

This shows the mark number and the status as follows.

: at mark (mark added at counter location)

: not at mark (mark not added at counter location)

⑭

Longest ﬁle time in project This shows the length of the longest ﬁle in the project.