User manual

ManualsBrandsZoom ManualsAudio InterfacesCombined mixer, audio interface and recorder

Table Of Contents

Usage and Safety Precautions
- Introduction
Names and functions of parts
- Top
- Rear panel
Equipment connection example
- Live PA system
Display overview
- Home Screen
Turning the unit on/off
- Turning the unit on
- Turning the power off
Using the MENU screen
Mixer
- Outputting input sounds from output devices
- Adjusting the tone and panning
- Using the built-in effects
- Using scene functions
- Setting signals output from MONITOR OUT A–E
Recording and playback
- Preparing to record
- Recording and playing tracks
- Adding marks
- Redoing parts of recordings (punching in/out)
- Mixing down tracks
- Recording automatically
- Capturing audio before recording starts
- Selecting the folder where projects are saved
- Selecting projects for playback
Using the metronome
- Enabling the metronome
- Changing metronome settings
Using the slate mic
- Recording with the slate mic
- Changing slate mic settings
Projects
- Changing project names
- Deleting projects
- Protecting projects
- Checking project information
- Saving projects to USB flash drives
- Importing projects from USB flash drives
- Managing marks
Audio files
- Deleting audio files
- Exporting audio files to USB flash drives
- Importing audio files from USB flash drives
Using audio interface functions
- Installing the driver
- Connecting to a computer
- Inputting return signals from the computer to a stereo channel
Using card reader functions
Recording and playback settings
- Changing the recording format
- Changing automatic recording settings
- Showing recording levels on level meters
- Enabling latency adjustment
- Changing the playback mode
SD card settings
- Checking the open space on SD cards
- Formatting SD cards
- Testing SD card performance
Various settings
- Setting the date and time
- Setting the footswitch
- Changing the sampling rate
- Disabling the automatic power saving function
- Adjusting the display contrast
- Restoring settings to factory defaults
- Checking the firmware versions
- Updating the firmware
Troubleshooting
Specifications
Send effects specifications
Mixer block diagram
Usage and Safety Precautions
- Introduction
Names and functions of parts
- Top
- Rear panel
Equipment connection example
- Live PA system
Display overview
- Home Screen
Turning the unit on/off
- Turning the unit on
- Turning the power off
Using the MENU screen
Mixer
- Outputting input sounds from output devices
  - Outputting sound from speakers
  - Outputting sound from headphones
- Adjusting the tone and panning
- Using the built-in effects
- Using scene functions
- Setting signals output from MONITOR OUT A–E
Recording and playback
- Preparing to record
  - Inserting SD cards
  - Creating new projects
- Recording and playing tracks
  - Recording
  - Playing recordings
- Adding marks
  - Adding marks during recording and playback
  - Moving in mark order
- Redoing parts of recordings (punching in/out)
- Mixing down tracks
  - Recording to the master track
  - Playing the master track
- Recording automatically
- Capturing audio before recording starts
- Selecting the folder where projects are saved
- Selecting projects for playback
Using the metronome
- Enabling the metronome
- Changing metronome settings
Using the slate mic
- Recording with the slate mic
- Changing slate mic settings
  - Changing the slate mic volume
  - Changing the slate mic routing
Projects
- Changing project names
- Deleting projects
- Protecting projects
- Checking project information
- Saving projects to USB flash drives
- Importing projects from USB flash drives
- Managing marks
Audio files
- Deleting audio files
- Exporting audio files to USB flash drives
- Importing audio files from USB flash drives
Using audio interface functions
- Installing the driver
- Connecting to a computer
- Inputting return signals from the computer to a stereo channel
Using card reader functions
Recording and playback settings
- Changing the recording format
- Changing automatic recording settings
  - Setting the automatic recording start level
  - Setting automatic stopping
- Showing recording levels on level meters
- Enabling latency adjustment
- Changing the playback mode
SD card settings
- Checking the open space on SD cards
- Formatting SD cards
- Testing SD card performance
  - Conducting a quick test
  - Conducting a full test
Various settings
- Setting the date and time
- Setting the footswitch
- Changing the sampling rate
- Disabling the automatic power saving function
- Adjusting the display contrast
- Restoring settings to factory defaults
- Checking the firmware versions
- Updating the firmware
Troubleshooting
- There is no sound or output is very quiet
Specifications
Send effects specifications
Mixer block diagram

Conﬁrm that is set to OFF.

Plug the AD-19 adapter designed for this unit into an outlet.

Set all knobs and faders to their minimum values.

Connect instruments, mics, speakers and other equipment.

HINT

Equipment connection example (→ Equipment connection example)

Set to ON.

Turn on the output devices connected to the .

NOTE

• When using a passive guitar or bass guitar, connect it to channel 1 or 2, and turn on. (→ Top)

• When using a condenser mic, turn on. (→ Top )

• The power will automatically turn off if the

is unused for 10 hours. If you want the power to stay

on always, disable the automatic power saving function (→ Disabling the automatic power saving func-

tion)