User manual

Selecting MONITOR OUT A–E output signals
1.
Use the MONITOR OUT switch for an output to select its output signal.
To output a mix set using MONITOR OUT A–E:
Set MONITOR OUT switch to A–E (
)
To output the same mix as the MASTER:
Set MONITOR OUT switch to MASTER (
)
Output different mixes for MONITOR OUT A–E
Output same mix as MASTER
NOTE
• Each output mix is saved with the scene and project.
• MONITOR OUT A–E do not output send-return effect signals.
• The parameters that can have separate settings for the MASTER and MONITOR OUT A–E are as fol-
lows.
- Fader positions (each channel)

Copying a mix
1.
While pressing the button ( or – ) for the output you want to copy for at least 2 seconds,
press a blinking copy destination button (
or – ).
This copies the mix from the source to the destination.
38