User manual
Table Of Contents
- Usage and Safety Precautions
- Names and functions of parts
- Equipment connection example
- Display overview
- Turning the unit on/off
- Using the MENU screen
- Mixer
- Recording and playback
- Using the metronome
- Using the slate mic
- Projects
- Audio files
- Using audio interface functions
- Using card reader functions
- Recording and playback settings
- SD card settings
- Various settings
- Troubleshooting
- Specifications
- Send effects specifications
- Mixer block diagram
- Usage and Safety Precautions
- Names and functions of parts
- Equipment connection example
- Display overview
- Turning the unit on/off
- Using the MENU screen
- Mixer
- Recording and playback
- Using the metronome
- Using the slate mic
- Projects
- Audio files
- Using audio interface functions
- Using card reader functions
- Recording and playback settings
- SD card settings
- Various settings
- Troubleshooting
- There is no sound or output is very quiet
- Recorded audio is too loud, too quiet or silent
- Recording not possible
- Playback sound cannot be heard or is quiet
- The sounds of devices connected to input jacks are distorted
- The send effect is not working
- There is no sound or output is very quiet from MONITOR OUT A–E
- Cannot select or use the L-12 device
- Sound skips during playback or recording
- Cannot play or record
- There is no sound or output is very quiet
- Specifications
- Send effects specifications
- Mixer block diagram
Changing slate mic settings
Changing the slate mic volume
1.
Select MENU > SLATE > LEVEL.
2.
Turn to adjust the volume, and press .
Changing the slate mic routing
1.
Select MENU > SLATE > ROUTING.
2.
Turn to select a channel for routing.
3.
Press confirm.
ALL: Set routing to all channels at once
ALL CLEAR: Clear all settings
Channel routing for slate mic input
ON
OFF
4.
Press .
HINT
Pressing toggles it ON/OFF.
59