User manual

Turn it on ( ) when connecting a guitar or bass guitar.
④
PAD switch
This attenuates (reduces) the input signal of the equipment connected
to the MIC/LINE input jack by 26 dB.
Turn this on (
) when connecting line level equipment.
⑤
SIG indicator
This indicator shows the signal level after adjustment by the GAIN knob.
The indicator color changes according to the signal level.
Lit red: −3 dB
Lit green: −48 to −3 dB
⑥
GAIN knob
Use to adjust the input gain of the mic preamp.
The range of adjustment depends on the on/off status of the MIC/LINE input jack switch (Hi-Z on chan-
nels 1–2 or PAD on channels 3–8).
Jack Adjustment range
MIC/LINE input jack 1–2 (XLR) +16 – +60 dB
MIC/LINE input jack 1–2 (TRS)
Hi-Z off +16 – +60 dB
Hi-Z on (TS) +6 – +50 dB
MIC/LINE input jack 3–8
PAD off +16 – +60 dB
PAD on -10 – +34 dB
⑦
COMP knob
Use to adjust the amount of compression.
⑧
SEL button
Use to select a channel for parameter adjustment in the channel strip section.
Channels with lit SEL buttons are affected by channel strip section adjustments.
⑨
REC/PLAY button
Use this button to switch between recording input signals to the SD card and playing back an already
recorded file from the SD card.
Status Explanation
Lit red
Input signals will be recorded to the SD card after passing through the
compressor.
Lit green
An already recorded file will be played back. Playback signals are input
before the equalizer. In this state, signals from input jacks are disabled.
Unlit Files will neither be recorded nor played back.
7