User manual

Showing recording levels on level meters
The signals of levels recorded to the recorder or recorded to a computer when using the audio interface
function can be shown on the level meters of each channel.
1.
Open MENU > REC / PLAY > REC LEVEL METER.
2.
Use to select ON, and press .
If recorded signal levels are higher than post fader levels, the recorded signal levels are shown lit
dimly on the level meters.

Enabling latency adjustment
When overdubbing, adjustment can be made for the delay caused by analog-to-digital conversion, signal
processing and digital-to-analog conversion.
1.
Open MENU > REC / PLAY > LATENCY ADJUST.
2.
Use to select ON, and press .
83