User manual
Table Of Contents
- Usage and Safety Precautions
- Names and functions of parts
- Equipment connection example
- Display overview
- Turning the unit on/off
- Using the MENU screen
- Mixer
- Recording and playback
- Using the metronome
- Using the slate mic
- Projects
- Audio files
- Using audio interface functions
- Using card reader functions
- Recording and playback settings
- SD card settings
- Various settings
- Troubleshooting
- Specifications
- Send effects specifications
- Mixer block diagram
- Usage and Safety Precautions
- Names and functions of parts
- Equipment connection example
- Display overview
- Turning the unit on/off
- Using the MENU screen
- Mixer
- Recording and playback
- Using the metronome
- Using the slate mic
- Projects
- Audio files
- Using audio interface functions
- Using card reader functions
- Recording and playback settings
- SD card settings
- Various settings
- Troubleshooting
- There is no sound or output is very quiet
- Recorded audio is too loud, too quiet or silent
- Recording not possible
- Playback sound cannot be heard or is quiet
- The sounds of devices connected to input jacks are distorted
- The send effect is not working
- There is no sound or output is very quiet from MONITOR OUT A–E
- Cannot select or use the L-12 device
- Sound skips during playback or recording
- Cannot play or record
- There is no sound or output is very quiet
- Specifications
- Send effects specifications
- Mixer block diagram
Restoring settings to factory defaults
You can restore an to its factory default settings.
1.
Open MENU > SYSTEM > FACTORY RESET.
2.
Use to select YES, and press .
NOTE
This does not reset mixer settings. (→ Resetting mixer settings)
Checking the firmware versions
The firmware versions can be viewed.
1.
Open MENU > SYSTEM > FIRMWARE VERSION.
This shows the firmware versions.
92