User manual
Table Of Contents
- Usage and Safety Precautions
- Names and functions of parts
- Equipment connection example
- Display overview
- Turning the unit on/off
- Using the MENU screen
- Mixer
- Recording and playback
- Using the metronome
- Using the slate mic
- Projects
- Audio files
- Using audio interface functions
- Using card reader functions
- Recording and playback settings
- SD card settings
- Various settings
- Troubleshooting
- Specifications
- Send effects specifications
- Mixer block diagram
- Usage and Safety Precautions
- Names and functions of parts
- Equipment connection example
- Display overview
- Turning the unit on/off
- Using the MENU screen
- Mixer
- Recording and playback
- Using the metronome
- Using the slate mic
- Projects
- Audio files
- Using audio interface functions
- Using card reader functions
- Recording and playback settings
- SD card settings
- Various settings
- Troubleshooting
- There is no sound or output is very quiet
- Recorded audio is too loud, too quiet or silent
- Recording not possible
- Playback sound cannot be heard or is quiet
- The sounds of devices connected to input jacks are distorted
- The send effect is not working
- There is no sound or output is very quiet from MONITOR OUT A–E
- Cannot select or use the L-12 device
- Sound skips during playback or recording
- Cannot play or record
- There is no sound or output is very quiet
- Specifications
- Send effects specifications
- Mixer block diagram
Updating the firmware
The firmware can be updated to the latest versions.
1.
Copy the file for updating the firmware to the root directory on an SD card.
NOTE
An update file for the latest version can be downloaded from the ZOOM website (www.zoom.co.jp).
2.
Insert the SD card into the .
3.
While pressing and holding , set to ON.
4.
press .
NOTE
Do not turn the power off or remove the SD card during a firmware update. Doing so could cause the
to become unstartable.
5.
After the firmware update completes, turn the off.
93