User Manual

3
Parameter 1 and 2 knobs
Use these to adjust the parameters for the selected effects.
See "Send effect specications" for the parameters of each effect.
4
MUTE button
This mutes or unmutes the signal sent from the built-in effect.
To mute the channel, press this button to light it.
5
SOLO button
When a SOLO button is ON, the signal before the EFX 1/2 RTN fader can be heard from the PHONES
jack. At such times, the SELECT knob will automatically select SOLO.
6
EFX RTN level meters
These show the levels of the signals sent from the built-in effect to the master bus after adjustment by
the EFX RTN fader. Their range is from −48 dB to 0 dB.
7
EFX RTN fader
This adjusts the levels of the signals sent from the built-in effect to the master bus in a range from −∞
dB to +10 dB.
NOTE
If the actual channel fader position differs from the channel fader position recalled using the scene func-
tion, for example, the level meter will show the recalled fader position.
12