User Manual

RECORDER section
1
Slate mic
7
STOP button
#
REW button
"
FF button
2
SLATE button/indicator
3
Display
4
MENU button
5
Selection encoder
6
TEMPO button/indicator
8
PLAY/PAUSE button/in-
dicator
9
REC button/indicator
!
OVER DUB button/indicator
1
Slate mic
This is a built-in mic for recording comments.
This mic input is active while the SLATE button is being pressed.
It can be set to record on channels 1–20, the MASTER channel or all channels. (→ "Changing the slate
mic routing")
2
SLATE button/indicator
This activates the slate mic.
The slate mic is activated while this button is being pressed and its indicator is lit.
3
Display
This shows the recorder status and MENU screen.
4
MENU button
This opens the menu.
5
Selection encoder
Use this to change menus and values and to move between items.
Operation Result
Turn when Home Screen open Search forward or backward in one-second increments.
Press when Home Screen open Set a mark.
Turn when menu open Move between parameters and change values.
Press when menu open Conrm parameter value.
6
TEMPO button/indicator
This sets the tempo of the metronome built into the recorder.
Press this button to make the recorder detect the tempo from the average value.
The indicator blinks at a tempo of 40.0–250.0 bpm during recording, playback and when one of the fol-
lowing effects that synchronize with tempo is selected.
Effects that synchronize with the tempo: Delay, Analog, P-P Dly
Metronome settings (→ "Changing metronome settings")
17