User Manual

Selecting MONITOR OUT A–F output signals
1.
Use the MONITOR OUT switch for an output to select its output signal.
To output a mix set using MONITOR OUT A–F:
Set the MONITOR OUT switch to A–F ( )
To output the same mix as the MASTER:
Set the MONITOR OUT switch to MASTER ( )
Output different mixes for MONITOR OUT A–F
Output same mix as MASTER
NOTE
Each output mix is saved with the scene and project.
The parameters that can have separate settings for the MASTER and MONITOR OUT A–F are as fol-
lows.
- Fader positions (each channel)
- EFX1/2 RTN positions
Select the type of equipment connected to MONITOR OUT A–F
1.
Set the MONITOR OUT PHONES/SPEAKER switch for the output according to the type of equipment
connected.
To connect headphones to MONITOR OUT A–F:
Set the MONITOR OUT PHONES/SPEAKER switch to ( ).
A stereo signal will be output from the jack.
To connect speakers to MONITOR OUT A–F:
Set the MONITOR OUT PHONES/SPEAKER switch to ( ).
A mono balanced signal will be output from the jack.
Copying a mix
1.
While pressing , for the output you want to copy, press a blinking copy destination
( , ).
This copies the mix from the source to the destination.
36