User Manual

Redoing parts of recordings (punching in/out)
Punching in/out is a function that can be used to rerecord parts of already recorded tracks. "Punching in"
is switching track status from playback to recording. "Punching out" is switching track status from record-
ing to playback.
With the , punching in/out can be conducted using buttons on its top or a footswitch (ZOOM FS01).
Selection
encoder
PLAY/PAUSE
button
REC/PLAY but-
tons
STOP button
REC button
OVER DUB button
1.
Press to turn it on (lighting its indicator).
2.
Press repeatedly for the tracks to rerecord until they light red.
3.
Press or turn left to move to before the part to be rerecorded.
4.
Press to start playback.
5.
Press at the position where you want to start rerecording (punch in).
6.
Press to end rerecording (punch out).
NOTE
• Punching in/out using a footswitch (ZOOM FS01) (→ "Setting the footswitch")
• Punching in/out overwrites recordings.
• Punching in/out can be done up to 99 times each time playback is started.
7.
Press to stop playback.
43